stillen gen 3

MrXistential · 01-03-2015, 08:32 PM

Installed stillen gen 3 intake. Followed other DIYs felt pretty good about install. Started car and it idled really rough then died. Tried it again and idled really rough then died. any ideas, has anyone had this happen to them?

Thanks

nismo13807 · 01-04-2015, 01:58 AM

did u disconnect the battery before installing it? if not.. try pulling the negative terminal on the battery off for like 15 mins or so to reset your ecu... also make sure you install the maf sensors correctly.. recheck the hoses and harnesses too... hope this helps

MrXistential · 01-04-2015, 10:21 PM

LOL yeah after an idiot check it turns out I left an air hose disconnected from the throttle body.

I dropped a screw from the engine cover that sits on top of the intake plenum into the valley of the V6. So I disconnected the throttle bodies from the plenum so I could remove the plenum and retrieve the screw. When I put the intake plenum back on and connected the throttle bodies I left the air hose that connects to the under side of the passenger side throttle body. As soon as I connected that hose the engine started purring like a kitty.

Should I try installing the 34 row oil cooler now...probably should leave that to more capable hands

SwissCheese · 01-05-2015, 08:59 PM

Glad it wasn't anything serious!

01-03-2015, 08:32 PM	#1 (permalink)
MrXistential Base Member Join Date: Feb 2013 Location: Long Beach, Ca Posts: 44 Drives: 2013 nissan 370z Rep Power: 12	stillen gen 3 Installed stillen gen 3 intake. Followed other DIYs felt pretty good about install. Started car and it idled really rough then died. Tried it again and idled really rough then died. any ideas, has anyone had this happen to them? Thanks

01-05-2015, 08:59 PM	#4 (permalink)
SwissCheese Track Member Join Date: Aug 2013 Location: Iowa Posts: 785 Drives: 2012 370Z NISMO Rep Power: 66	Glad it wasn't anything serious! __________________ Current Ride: 2012 Nissan 370Z NISMO #0389 Mods: Fast Intentions Resonated Test Pipes and TDX Exhaust with 18" Resonators (#1054), K&N Drop-Ins, GTR Start Button

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Stillen Dual Exhaust & Stillen front plate holder Pick up in Bay Area	A7594217	Parts for sale (Private Classifieds)	17	08-04-2013 11:27 PM
STILLEN Stillen Gen 3 Ultra Long Tube Dual Intake Kit Nissan 370Z	alright	Forced Induction	4	03-20-2013 02:38 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 12:53 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 05:20 PM

01-04-2015, 01:58 AM	#2 (permalink)
nismo13807 Enthusiast Member Join Date: Jan 2013 Location: Illinois Posts: 340 Drives: 2013 Nismo 370z Rep Power: 3367	did u disconnect the battery before installing it? if not.. try pulling the negative terminal on the battery off for like 15 mins or so to reset your ecu... also make sure you install the maf sensors correctly.. recheck the hoses and harnesses too... hope this helps

01-04-2015, 10:21 PM	#3 (permalink)
MrXistential Base Member Join Date: Feb 2013 Location: Long Beach, Ca Posts: 44 Drives: 2013 nissan 370z Rep Power: 12	LOL yeah after an idiot check it turns out I left an air hose disconnected from the throttle body. I dropped a screw from the engine cover that sits on top of the intake plenum into the valley of the V6. So I disconnected the throttle bodies from the plenum so I could remove the plenum and retrieve the screw. When I put the intake plenum back on and connected the throttle bodies I left the air hose that connects to the under side of the passenger side throttle body. As soon as I connected that hose the engine started purring like a kitty. Should I try installing the 34 row oil cooler now...probably should leave that to more capable hands