Stillen header/pulley & z1 test pipes

Wilson2608 · 01-03-2015, 09:15 PM

I'm actually installing my new O2 sensor as we speak lol BE CAREFUL taking those O2 sensors out

Sent from my iPhone using Tapatalk

PharmDZ · 01-03-2015, 09:57 PM

Gonna go PB blast them again now out of pure paranoia. lol did you try taking them off when the headers/cats were off the car?

Wilson2608 · 01-03-2015, 09:58 PM

I took them out of the car first

Sent from my iPhone using Tapatalk

PharmDZ · 01-04-2015, 10:29 PM

Woooo! Headers and test pipes are done. Thanks again Wilson for the heads up on the steering knuckle. I was able to get the headers out/in without having to drop the engine or tear the front apart. Really wasn't nearly as bad as I thought. I did the passenger side myself, but the driver's side without a doubt requires two people. It is a lot by feel, having the person on the opposite side (above/below you) spotting the wrench making sure it's still on the bolt correctly. PB blast the crap out of them too! I had zero issues with breaking any bolts loose and the studs stayed in just fine for me.

Wilson2608 · 01-04-2015, 10:31 PM

Good! Glad to hear it went well

Sent from my iPhone using Tapatalk

01-03-2015, 09:15 PM	#16 (permalink)
Wilson2608 Enthusiast Member Join Date: Dec 2014 Location: Nashville Posts: 301 Drives: Nissan 370Z Sport Rep Power: 10	I'm actually installing my new O2 sensor as we speak lol BE CAREFUL taking those O2 sensors out Sent from my iPhone using Tapatalk PharmDZ likes this. __________________ Stillen G3, z1 Intake Manifold, Stillen Headers, Z1 HFC's, Stillen Catback. 330whp 267 ft- lbs tuned at Z1 motorsports.

01-03-2015, 09:58 PM	#18 (permalink)
Wilson2608 Enthusiast Member Join Date: Dec 2014 Location: Nashville Posts: 301 Drives: Nissan 370Z Sport Rep Power: 10	I took them out of the car first Sent from my iPhone using Tapatalk __________________ Stillen G3, z1 Intake Manifold, Stillen Headers, Z1 HFC's, Stillen Catback. 330whp 267 ft- lbs tuned at Z1 motorsports.

01-04-2015, 10:31 PM	#20 (permalink)
Wilson2608 Enthusiast Member Join Date: Dec 2014 Location: Nashville Posts: 301 Drives: Nissan 370Z Sport Rep Power: 10	Good! Glad to hear it went well Sent from my iPhone using Tapatalk __________________ Stillen G3, z1 Intake Manifold, Stillen Headers, Z1 HFC's, Stillen Catback. 330whp 267 ft- lbs tuned at Z1 motorsports.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Header Wrap on Test Pipes	LostSol	Intake/Exhaust	24	09-24-2020 05:18 PM
F.I long tube header or Stillen headers with test pipes	macchiato80	Engine & Drivetrain	3	09-04-2014 06:48 AM
[FOR SALE] STILLEN HFC, STILLEN RACE/Test Pipes	g35man04	Parts for sale (Private Classifieds)	6	03-23-2014 11:59 PM
Stillen CBE+non res test pipes?	dichoi	Intake/Exhaust	8	03-16-2014 12:47 AM
How much did a Header/HFC/Pulley Install cost?	///PureSwank	Nissan 370Z General Discussions	16	09-23-2013 09:58 AM

01-03-2015, 09:57 PM	#17 (permalink)
PharmDZ Track Member Join Date: Jul 2012 Location: New Jersey Posts: 997 Drives: 11 Nissan 370Z BS M6 Rep Power: 13	Gonna go PB blast them again now out of pure paranoia. lol did you try taking them off when the headers/cats were off the car?

01-04-2015, 10:29 PM	#19 (permalink)
PharmDZ Track Member Join Date: Jul 2012 Location: New Jersey Posts: 997 Drives: 11 Nissan 370Z BS M6 Rep Power: 13	Woooo! Headers and test pipes are done. Thanks again Wilson for the heads up on the steering knuckle. I was able to get the headers out/in without having to drop the engine or tear the front apart. Really wasn't nearly as bad as I thought. I did the passenger side myself, but the driver's side without a doubt requires two people. It is a lot by feel, having the person on the opposite side (above/below you) spotting the wrench making sure it's still on the bolt correctly. PB blast the crap out of them too! I had zero issues with breaking any bolts loose and the studs stayed in just fine for me.