|
1) Here is the driver side door switch panel. Simply pry it from the door and disconnect a couple of wire harnesses. Do the same for passenger side. 2) Pry
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
04-30-2010, 12:49 AM
|
#11 (permalink) |
|
A True Z Fanatic
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 44   |
Driver Side Door Switch
1) Here is the driver side door switch panel. Simply pry it from the door and disconnect a couple of wire harnesses. Do the same for passenger side.
 2) Pry back cover on all sides.  3) Pry switch assembly from panel trim.  4) Pop off the power window switch cap.  5) Lift the switch assembly PCB.  6) 3 LEDs are fully exposed. 4th LED is underneath the power window switch. Desolder the switch (3 terminals) to get access to the LED. The power mirror switch uses 2 LEDs.  7) The LEDs are roughly 0805 size, but I used PLCC2 for this mod. The power mirror switch requires LEDs no larger than 0805 due to clearance with the switch wipers.  8) Done! Driver side is a bit tedious to work on. The passenger side is much easier to work on. Be sure to follow window reset procedure. 
__________________
Last edited by DIGItonium; 02-08-2011 at 08:14 PM. Reason: Embed Picture Files |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Want to change the interior | Gables | Exterior & Interior | 10 | 05-17-2012 04:19 PM |
| pod lighting color change? | g35300mm | Nissan 370Z General Discussions | 2 | 02-10-2010 01:28 PM |
| what interior color?? | Arcangel | Nissan 370Z General Discussions | 15 | 03-08-2009 10:11 PM |
| powdercoating just to change color? | mattkim85 | Nissan 370Z General Discussions | 2 | 03-02-2009 03:08 PM |
30Likes
Threaded Mode
