DIY 2012 25 row Setreb Series 9 Install & stock oil cooler delete

Rangerz

Finished the oil cooler install about 2 weeks ago. Works great. I have 1 track event on it no leaks and temps never got to 220. I had one snafu though. I originally ordered the braided SS oil line and ran it the traditional way around the passenger side and over the sway bar. While putting in my upper control arms I jacked up the passenger side and noticed the sway bar was hitting my fitting. I didn't like that at all and reordered the starlite racing hose which is a Kevlar weave cover line so I could route it around the drivers side as I had wanted in the first place. I also made up some spacers so I could retain the front damper.

Some pics of the final routing and the spacers.

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

__________________
Stillen Gen III/ NST/ Fast Intentions Non-Res HFC & 12" Resonated CF TDX/ Setreb series 9 OC/ SPL upper control arms/ Whiteline front & rear swaybars/ Uprev tuned by Seb@specialtyZ/ 319HP 262TQ/ Z1 PS Cooler/ Z1 SS Premium break lines/ CJM Road Race pump/Carbotech F:XP10 R:XP8 Nismo OC DIY