DRL on with headlights MOD

Agent K · 02-05-2015, 05:02 PM

FIXED

It was what I suspected; the blade connector backed out of the relay socket. I knew the first connector was too small; it barely stayed in the socket. Although I was hoping it would stay in. I was too lazy the first time to go buy a bigger connector but I bought one today and installed. I had to trim the bigger connector a little...lets see how long this one stays in. Everything works as before.

To Kabestro: I used 18 gauge hook up wire. IIRC, the OEM wire is also 18 gauge.

RLami · 04-19-2015, 11:26 AM

I'm having a bit of a hard time telling what is going on with the red and beige wires from the picture. They are pulled from the IPDM, combined, and then just ran to that extra relay port? the bundle of wires seems to be blocking the view. Attached a picture as I'm thinking of it. Thanks!

RLami · 04-19-2015, 06:06 PM

update. Yes. That is what's required. Just completed.

Zipper1 · 05-03-2015, 11:07 AM

Quote:

Originally Posted by pearlyZ

So it be on daytime w/o headlight, and on nighttime with headlight?

Dont want to lose the DRLs during the day.
anyone?

Kabestro · 05-03-2015, 12:35 PM

Quote:

Originally Posted by Zipper1

Dont want to lose the DRLs during the day.
anyone?

From what Ive read, the DRLs turn on when you turn on the car. You wont have to lower the ebrake anymore for them to turn on. And they stay on with the headlights.

dislimn · 05-07-2015, 06:06 PM

They stay on all the time unless you're in ACC or obviously off. In the "on" position (engine off) they are also on.

Bright as fck with the highbeams on

WD9HKC · 05-12-2015, 07:32 PM

Thank you. I just did this mod on my 13'. Most difficult part was removing the fuse box (IPDM, I hate acronyms). Had to use a right angle flat bar to pry the fuse box out of the metal bracket. Very difficult to remove. A picture of a spade clip would have helped me.
The socket it plugs into did not lign up with the plastic holding it. A little persuasion with a couple of screw drivers did the trick. I love the way it looks, wanted to do this since I got the car. steve

Kabestro · 05-12-2015, 09:36 PM

Quote:

Originally Posted by WD9HKC

Thank you. I just did this mod on my 13'. Most difficult part was removing the fuse box (IPDM, I hate acronyms). Had to use a right angle flat bar to pry the fuse box out of the metal bracket. Very difficult to remove. A picture of a spade clip would have helped me.
The socket it plugs into did not lign up with the plastic holding it. A little persuasion with a couple of screw drivers did the trick. I love the way it looks, wanted to do this since I got the car. steve

I was just about to ask you guys to post a pic of the connector that you guys are using. Is it completely flat or do the ones with a U shape work also?

WD9HKC · 05-13-2015, 06:35 AM

Quote:

Originally Posted by Kabestro

I was just about to ask you guys to post a pic of the connector that you guys are using. Is it completely flat or do the ones with a U shape work also?

I removed the relay to the right of where you plug in the wire to see the size of the termimal. About 1/4 to 5/16 wide flat spade. Sorry I don't have one to measure.

joker77 · 05-22-2015, 05:41 PM

Worked! MY very first ever ever DIY Mod. Many thanks!!!!

rli2bcz · 05-28-2015, 02:00 AM

just picked up my 2015 nismo and I want to do this. but the more I read, the more confused I get. am I basically splicing the red and beige wire together and pluging it into another slot?

joker77 · 05-29-2015, 09:24 AM

Quote:

Originally Posted by rli2bcz

just picked up my 2015 nismo and I want to do this. but the more I read, the more confused I get. am I basically splicing the red and beige wire together and pluging it into another slot?

yes. It's really that simple.

rli2bcz · 05-30-2015, 12:13 PM

its simple but the pictures aren't clear and im not the best person with wires. TRUST ME! even I can F this up.

Kabestro · 05-30-2015, 05:03 PM

I'm all set to do this tomorrow, let's see how it goes...

Kabestro · 05-31-2015, 01:24 PM

Can you connect it to any of those four ports? Or does it have to be the one in the top right corner?
Also how do you get this cover off?

02-05-2015, 05:02 PM	#31 (permalink)
Agent K Base Member Join Date: Jul 2013 Location: Memphis, TN Posts: 155 Drives: '13 370Z MBlue 6MT Rep Power: 11	FIXED It was what I suspected; the blade connector backed out of the relay socket. I knew the first connector was too small; it barely stayed in the socket. Although I was hoping it would stay in. I was too lazy the first time to go buy a bigger connector but I bought one today and installed. I had to trim the bigger connector a little...lets see how long this one stays in. Everything works as before. To Kabestro: I used 18 gauge hook up wire. IIRC, the OEM wire is also 18 gauge. Kabestro likes this. __________________ '13 370Z Midnight Blue 6MT / Touring Sport w/nav / PPE Long Tube Racing Headers / FI TDX 10" Resonator w/CF mufflers / K&N Drop-Ins / ZSpeed Underbody Shroud v2 / DRL 'always on' Mod

05-07-2015, 06:06 PM	#36 (permalink)
dislimn Base Member Join Date: Apr 2014 Location: AR Posts: 101 Drives: 14 Z Sport 6 speed Rep Power: 20	They stay on all the time unless you're in ACC or obviously off. In the "on" position (engine off) they are also on. Bright as fck with the highbeams on __________________ tell the survivors help is on the way

05-22-2015, 05:41 PM	#40 (permalink)
joker77 Base Member Join Date: Apr 2015 Location: Los Angeles Posts: 28 Drives: 2014 Z cpe Rep Power: 10	Worked! MY very first ever ever DIY Mod. Many thanks!!!! littlejuanito likes this.

05-30-2015, 05:03 PM	#44 (permalink)
Kabestro Enthusiast Member Join Date: Aug 2012 Location: Puerto Rico Posts: 331 Drives: 13 Nissan 370Z MR M6 Rep Power: 39	I'm all set to do this tomorrow, let's see how it goes... __________________ Stillen Gen 3 CAI / Fast Intentions HFC and CBE 12" Res. (#730) / Swift Springs / 20mm H&R Spacers / Clutch Helper Spring / UpRev Tune 322whp.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Headlights	EastcoastZ	Parts for sale (Private Classifieds)	0	07-11-2013 09:09 AM
[WTB] Trade tinted headlights for clear headlights	ShoFamous	Parts for sale (Private Classifieds)	11	04-27-2012 01:54 PM
[WTB] Headlights	Dwv2005	Parts for sale (Private Classifieds)	0	03-05-2012 11:39 PM
Headlights	cfleming2226	Exterior & Interior	1	01-30-2012 06:40 PM
WTT: my PG painted headlights for your stock headlights	Cjanik	Parts for sale (Private Classifieds)	15	10-27-2010 02:28 PM

04-19-2015, 06:06 PM	#33 (permalink)
RLami Base Member Join Date: Apr 2014 Location: Colorado Springs, CO Posts: 48 Drives: 2015 Focus ST ST3 Rep Power: 11	update. Yes. That is what's required. Just completed.

05-12-2015, 07:32 PM	#37 (permalink)
WD9HKC Base Member Join Date: Jun 2013 Location: mt prospect IL Posts: 3 Drives: 13' 370z sport M6 Rep Power: 11	Thank you. I just did this mod on my 13'. Most difficult part was removing the fuse box (IPDM, I hate acronyms). Had to use a right angle flat bar to pry the fuse box out of the metal bracket. Very difficult to remove. A picture of a spade clip would have helped me. The socket it plugs into did not lign up with the plastic holding it. A little persuasion with a couple of screw drivers did the trick. I love the way it looks, wanted to do this since I got the car. steve

05-28-2015, 02:00 AM	#41 (permalink)
rli2bcz Base Member Join Date: Apr 2010 Location: Las Vegas Posts: 237 Drives: Nissan 370z Rep Power: 15	just picked up my 2015 nismo and I want to do this. but the more I read, the more confused I get. am I basically splicing the red and beige wire together and pluging it into another slot?

05-30-2015, 12:13 PM	#43 (permalink)
rli2bcz Base Member Join Date: Apr 2010 Location: Las Vegas Posts: 237 Drives: Nissan 370z Rep Power: 15	its simple but the pictures aren't clear and im not the best person with wires. TRUST ME! even I can F this up.