DIY: Replacing Your Clutch, Pressure Plate, Flywheel, and CSC (Zspeed HD CSC)

djtodd · 08-24-2014, 06:36 PM

Quote:

Originally Posted by aszyd

Thanks for the DIY! I finished doing a flywheel yesterday.

Also, I question whether it is necessary to remove the crank position sensor for this task. On my '13 trans, the CPS hole is split in half. I was able to put the trans back on with the sensor bolted in place.

It may not be, but that's any easy one to damage should something go wonky. It's actually really easy to remove from the top. I should update the DIY to add that

AlexRaymond19 · 08-24-2014, 09:36 PM

Wonky!! Love it!

R0bDC · 01-28-2015, 06:40 PM

HI Guys,

Here is what I am been charged for this change
1.) 9 Hours labor at 120 dollars - 1080
2.) Flywheel - 1084'
3.) Clutch - 839
4.) Pilot Bushing - 6
5.) Master Cylinder - 169
6.) Slave Cylinder - 163
7.) Cable Line for M & S Cylinder - 47
8.) Brake Fluid - 60

Total - 3448

Lol, Thoughts?

Chuck33079 · 01-28-2015, 06:42 PM

Stock clutch and flywheel? Another stock CSC? You'd have to be crazy to go through all that and put back in stock parts.

djtodd · 01-28-2015, 06:56 PM

Absolutely, incredibly overpriced.

You can get a really nice clutch and flywheel combo for 1100ish. The labor should be 7ish hours as well

djtodd · 01-28-2015, 06:57 PM

Yeah I didn't even notice all the other parts. Someone is taking you for a ride

Bananaz · 01-28-2015, 10:06 PM

Holy ****. Me and my buddy did this on our backs in his garage and it still only took about 8-9 hours. It was a huge PITA but not anywhere near $3k lol I left the stock clutch/flywheel but upgraded to a zspeed csc and master.

They charged you over 1900 for clutch and flywheel which is nuts..

djtodd · 01-28-2015, 10:25 PM

I have a spare clutch and flywheel I would sell you for $100 lol

Bananaz · 01-28-2015, 10:27 PM

Quote:

Originally Posted by djtodd

I have a spare clutch and flywheel I would sell you for $100 lol

If that was towards me, if I ever do that again I'll make sure I don't have to even another time. So I'd stick to just spending the money on a nice little setup but I appreciate the offer

djtodd · 01-28-2015, 10:28 PM

That was to the guy getting it prison style at the stealership. o.0

Smashley · 01-28-2015, 10:42 PM

I thought an aftermarket flywheel wasn't worth the excessive chatter...

djtodd · 01-28-2015, 10:43 PM

I have very little chatter. Frankly I found it to be one of the absolute best mods as far as bang for your buck. The needle bearing pilot helps.

Smashley · 01-28-2015, 10:56 PM

Quote:

Originally Posted by djtodd

I have very little chatter. Frankly I found it to be one of the absolute best mods as far as bang for your buck. The needle bearing pilot helps.

Which flywheel did you purchase?

djtodd · 01-28-2015, 10:57 PM

The dxd billet. I think it's 13lbs or so

ZeNato · 02-19-2015, 05:49 AM

im gonna need this soon... Subbed so it doesnt run away

08-24-2014, 09:36 PM	#32 (permalink)
AlexRaymond19 Track Member Join Date: Jun 2011 Location: Maine Posts: 771 Drives: 2010 Nissan 370z Rep Power: 14	Wonky!! Love it! __________________ 2010 370Z Touring MT \| Stillen \| Motordyne \| Momentum\| Z1 \| Fast Intentions \| Advant Garde \| RE11 \| Swift \| SPC \| Quaife \| Whiteline \| Evo R \| 322RWHP 259ft-lb Mustang Last edited by AlexRaymond19; 08-24-2014 at 09:38 PM. Reason: pocket

01-28-2015, 06:42 PM	#34 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Stock clutch and flywheel? Another stock CSC? You'd have to be crazy to go through all that and put back in stock parts. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

01-28-2015, 06:56 PM	#35 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	Absolutely, incredibly overpriced. You can get a really nice clutch and flywheel combo for 1100ish. The labor should be 7ish hours as well __________________ DJTodd's Build Thread Fast Intentions • Volk • Stoptech • Carbotech • SPL • Southbend • OS Giken • RJM • Sparco • RobiSpec • AIM • Driver Mod

01-28-2015, 06:57 PM	#36 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	DIY: Replacing Your Clutch, Pressure Plate, Flywheel, and CSC (Zspeed HD CSC) Yeah I didn't even notice all the other parts. Someone is taking you for a ride __________________ DJTodd's Build Thread Fast Intentions • Volk • Stoptech • Carbotech • SPL • Southbend • OS Giken • RJM • Sparco • RobiSpec • AIM • Driver Mod Last edited by djtodd; 01-28-2015 at 07:01 PM.

01-28-2015, 10:06 PM	#37 (permalink)
Bananaz Track Member Join Date: Dec 2013 Location: Central Jersey Posts: 637 Drives: 09 370z 6MT/B+Sport Rep Power: 13	Holy **. Me and my buddy did this on our backs in his garage and it still only took about 8-9 hours. It was a huge PITA but not anywhere near $3k lol I left the stock clutch/flywheel but upgraded to a zspeed csc and master. They charged you over 1900 for clutch and flywheel which is nuts.. __________________ BC - SSR - Evo-R - ViS - SPC - ZSpeed - Beluga - Blox - 35% Tint - Clutch Spring - Fang Forced Air Ducting**

01-28-2015, 06:40 PM	#33 (permalink)
R0bDC Enthusiast Member Join Date: Nov 2012 Location: California Posts: 307 Drives: 2009 370Z Rep Power: 12	HI Guys, Here is what I am been charged for this change 1.) 9 Hours labor at 120 dollars - 1080 2.) Flywheel - 1084' 3.) Clutch - 839 4.) Pilot Bushing - 6 5.) Master Cylinder - 169 6.) Slave Cylinder - 163 7.) Cable Line for M & S Cylinder - 47 8.) Brake Fluid - 60 Total - 3448 Lol, Thoughts?

01-28-2015, 10:25 PM	#38 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	I have a spare clutch and flywheel I would sell you for $100 lol __________________ DJTodd's Build Thread Fast Intentions • Volk • Stoptech • Carbotech • SPL • Southbend • OS Giken • RJM • Sparco • RobiSpec • AIM • Driver Mod

01-28-2015, 10:28 PM	#40 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	That was to the guy getting it prison style at the stealership. o.0 Bananaz likes this. __________________ DJTodd's Build Thread Fast Intentions • Volk • Stoptech • Carbotech • SPL • Southbend • OS Giken • RJM • Sparco • RobiSpec • AIM • Driver Mod

01-28-2015, 10:42 PM	#41 (permalink)
Smashley Enthusiast Member Join Date: Aug 2013 Location: Maryland Posts: 347 Drives: mt/sport/tour MB Rep Power: 11	I thought an aftermarket flywheel wasn't worth the excessive chatter...

01-28-2015, 10:43 PM	#42 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	I have very little chatter. Frankly I found it to be one of the absolute best mods as far as bang for your buck. The needle bearing pilot helps. __________________ DJTodd's Build Thread Fast Intentions • Volk • Stoptech • Carbotech • SPL • Southbend • OS Giken • RJM • Sparco • RobiSpec • AIM • Driver Mod

01-28-2015, 10:57 PM	#44 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	The dxd billet. I think it's 13lbs or so Smashley likes this. __________________ DJTodd's Build Thread Fast Intentions • Volk • Stoptech • Carbotech • SPL • Southbend • OS Giken • RJM • Sparco • RobiSpec • AIM • Driver Mod

02-19-2015, 05:49 AM	#45 (permalink)
ZeNato Base Member Join Date: Apr 2014 Location: Hongen, Germany Posts: 202 Drives: 09 Nissan 370z Nismo Rep Power: 10	im gonna need this soon... Subbed so it doesnt run away djtodd and Jimbo370 like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] OEM Flywheel, Pressure Plate, and Clutch	SPOHN	Parts for sale (Private Classifieds)	4	01-26-2013 10:52 AM
[FOR SALE] 370z clutch, flywheel & pressure plate	40flash	Parts for sale (Private Classifieds)	2	06-11-2012 08:10 AM
[FOR SALE] Stock clutch & pressure plate - 12kmiles	Ron	Parts for sale (Private Classifieds)	0	04-04-2012 03:25 PM
370Z flywheel, pressure plate & Clutch disc	40flash	Parts for sale (Private Classifieds)	2	07-23-2010 07:03 AM