|
Ok, today was a big big day. Got the pieces on the car, realised they wont fit due to a lack of space behind them where they were in the
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
08-31-2013, 02:04 PM
|
#14 (permalink) |
|
Track Member
 
Join Date: Jun 2010
Location: Newport News, VA
Posts: 820
Drives: Nissan 370z PW M6
Rep Power: 17   |
Ok, today was a big big day. Got the pieces on the car, realised they wont fit due to a lack of space behind them where they were in the corners. Solution was to cut them up and on the spot fiberglas some new bends into them which took some time to get right. They are not pretty or perfect but you know what, they work, and i did the work myself from start to finish.
I am very proud of how they turned out and id actually like to thank Stillen for having poor customer service because if they had not blown me off id have never attempted this myself. CHECK OUT POST 2 FOR PICTURES!!
__________________
PW 370z | AEM | MISHIMOTO | ARK PERFORMANCE | WHITELINE | NISMO | STILLEN | FORGESTAR | BC RACING | AMS | NON STOP TUNING | CARBONETICS LSD | 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE Last edited by Mozen; 08-31-2013 at 02:10 PM. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Brake ducts for Amuse? | DarkJak | Brakes & Suspension | 15 | 07-31-2018 01:58 AM |
| Brake Ducts: Facts Only Please | osbornsm | Nissan 370Z General Discussions | 2 | 02-20-2012 12:51 PM |
| FYI on DIY Brake Ducts | ResIpsa | Track / Autocross / Drifting / Dragstrip | 4 | 02-15-2012 11:01 PM |
| Brake cooling ducts | lazer_Z | Brakes & Suspension | 27 | 11-08-2011 11:17 AM |
| So....brake ducts? | ImportConvert | Nissan 370Z General Discussions | 7 | 10-25-2011 04:05 PM |
9Likes
Threaded Mode
