[DIY] Install Rearview Camera for Stock Nav (2010)

Achilles5 · 06-19-2017, 04:50 PM

Quote:

Originally Posted by l2iceman

Hey everyone, so I decided to finally try this today. And instructions on first page are accurate. Here are the photos I've taken showing the back of the connector, it counts from right to left, top to bottom. Plug 7 and 8 are the correct ones to connect to. Make sure the pins are pushed in all the way, I didn't and the video flickered, but now it's perfect. I just need a camera that doesn't have built in lines.

In the connector picture (sorry it's blurry), the two blank ones on the top roe between the red and black wires are pins 8 and 7.

I'm using a license plate camera I ordered off of eBay, it replaced the left license plate light.

Sent from my SM-N920W8 using Tapatalk

So to get this straight since i can only see your pics, all i need is this?

yellow female RCA cable
male to female jumpers with headers
backup camera

l2iceman · 06-19-2017, 05:25 PM

Quote:

Originally Posted by Achilles5

So to get this straight since i can only see your pics, all i need is this?

yellow female RCA cable
male to female jumpers with headers
backup camera

Yepp, exactly. That's it.

Sent from my SM-N920W8 using Tapatalk

ins_man · 10-26-2017, 04:52 PM

I got these jumpers but the pins don't seem to be long enough to go through the plug and make a good connection with the Nav unit. Are you using the headers in some way?

l2iceman · 10-26-2017, 04:54 PM

Quote:

Originally Posted by ins_man

I got these jumpers but the pins don't seem to be long enough to go through the plug and make a good connection with the Nav unit. Are you using the headers in some way?

I used one of those thin screwdrivers used for like eye glass repair, to shove the pins all the way through.

Sent from my SM-N920W8 using Tapatalk

ins_man · 10-28-2017, 11:10 PM

Thanks. I gave up after a few failed attempts and even put the whole dash back together. Today, I decided to try one more time. Worked like a charm. The only other question is ... does anyone know how to turn on the active guidelines within the factory Nav unit?

10-26-2017, 04:52 PM	#3 (permalink)
ins_man Base Member Join Date: Feb 2014 Location: Texas Posts: 6 Drives: 2010 370z Rep Power: 13	Still Lost I got these jumpers but the pins don't seem to be long enough to go through the plug and make a good connection with the Nav unit. Are you using the headers in some way?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Rearview Camera & DVD	Zyonara	DIY Section (Do-It-Yourself)	63	07-30-2013 06:10 PM
Rearview Camera for OEM 2010 Sat/Nav	40th370z	Nissan 370Z General Discussions	1	08-30-2012 10:43 AM
Rearview Camera Question	heebus	Nissan 370Z General Discussions	7	07-02-2012 03:51 PM
Review: bdl99 2010 Back-up Camera Install	N8GTOL	Audio & Video	3	11-21-2010 05:28 PM
Rearview Camera and DVD	Zyonara	Audio & Video	10	03-10-2010 11:22 PM

10-28-2017, 11:10 PM	#5 (permalink)
ins_man Base Member Join Date: Feb 2014 Location: Texas Posts: 6 Drives: 2010 370z Rep Power: 13	Thanks. I gave up after a few failed attempts and even put the whole dash back together. Today, I decided to try one more time. Worked like a charm. The only other question is ... does anyone know how to turn on the active guidelines within the factory Nav unit?