|
Yes- Just taped off the reverse light. Use your nail and make sure the edge is completely lined up. And when you peel, peel when its wet and use a
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
06-06-2013, 09:49 PM
|
#11 (permalink) |
|
A True Z Fanatic
Join Date: Jul 2011
Location: Scottsdale
Age: 35
Posts: 1,636
Drives: 09 BS 7AT 370z
Rep Power: 19   |
Yes- Just taped off the reverse light. Use your nail and make sure the edge is completely lined up. And when you peel, peel when its wet and use a sharp edge to tear against. Itll make sure none of the dip hangs on to the tape when you remove it.
Good luck! Just do one or two coats. Anything more than that gets too dark. Also. Test the lights with each coat that you do. That way you get the desired darkness that you are achieving.
__________________
2009 Brilliant Silver BASE 7AT | TEIN S-Tech Springs | K&N Drop Ins & z1 Maf Tubes | AAM S-Line Short Tails | 5% Tint | 20MM Spacers | Sport Spoiler NickTurnon's 370z Build |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Taillight Blackout | Burriss03 | DIY Section (Do-It-Yourself) | 32 | 01-27-2013 03:57 PM |
| Blackout Headlight HELP* | Grindkiezer | DIY Section (Do-It-Yourself) | 9 | 01-17-2013 06:43 PM |
| Blackout Headlights | future370zzz | Northern California Region | 37 | 09-04-2012 09:12 AM |
| DIY Taillight Blackout | travnflorida | DIY Section (Do-It-Yourself) | 10 | 03-28-2011 02:19 PM |
| A-Pillar Blackout | 370Zsteve | Nissan 370Z General Discussions | 12 | 01-03-2010 03:42 PM |
82Likes
Threaded Mode
