![]() |
I have these: TAKADA LDS Car too low for a hydraulic jack to fit under? Use these low down slopes to help raise up your vehicle. These plastic car ramps
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
|
![]() |
#1 (permalink) |
The370Z.com Sponsor
Join Date: Jun 2009
Location: Loganville, GA
Posts: 5,944
Drives: 370z
Rep Power: 2187 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
I have these:
TAKADA LDS Car too low for a hydraulic jack to fit under? Use these low down slopes to help raise up your vehicle. These plastic car ramps are sold in sets of 2 and also work great for those low profile cars that you need just a small amount of lift to get a hydraulic jack under the body or ground effects kits. These plastic ramps are the only solution for cars with expensive ground effects for getting a jack under the vehicle to lift it for an oil change or other undercarriage service. Whether you are working on you car in the garage or if you are a full blown auto service center, you will find these low cost plastic car ramps offer many uses for the automobile enthusiast or service center. Made from recycled Takata race belts ![]()
__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968 |
![]() |
![]() |
![]() |
#3 (permalink) |
WFLYIDNNE
![]() Join Date: Jul 2009
Location: In The Fastlane
Posts: 50,648
Drives: 02 GDB WRX
Rep Power: 452 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Race ramps are too damned expensive. $475 for the extended 2 piece and the lowering extensions... Eff that.
![]()
__________________
![]() Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14 |
![]() |
![]() |
![]() |
#4 (permalink) |
A True Z Fanatic
![]() Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
my cars are on flatstoppers right now from raceramps and they are of high quality.
the thing that ruins it for me on their ramps for lower cars is it's too damn big for storage. i know it breaks up into 2-3 pieces, but too long, too big. Race Ramps Xtenders - RR-XT Lowered Car Ramps. |
![]() |
![]() |
![]() |
#5 (permalink) |
Track Member
Join Date: Oct 2011
Location: West Chester, PA
Age: 36
Posts: 752
Drives: 09 370Z NISMO PG 6MT
Rep Power: 15 ![]() ![]() ![]() ![]() |
![]()
I use rhino ramps, two at the front, but i can't get up them without the lip hitting, so i put a 2x4 in front of them and then my lip clears by like 1/8" or maybe just touches it
|
![]() |
![]() |
![]() |
#8 (permalink) |
A True Z Fanatic
Join Date: Apr 2011
Location: NYC
Posts: 6,365
Drives: '12 G41 B/S M6
Rep Power: 3717 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Just to confirm...these?
Hopkins 11909 RhinoRamps Vehicle Ramps (Pair, 12, 000lb. GVW Capacity) : Amazon.com : Automotive Thanks!
__________________
...need boost... |
![]() |
![]() |
![]() |
#9 (permalink) | |
Track Member
Join Date: Nov 2008
Location: San Francisco
Posts: 846
Drives: 991.2 GT3
Rep Power: 18 ![]() ![]() |
![]() Quote:
|
|
![]() |
![]() |
![]() |
#11 (permalink) |
Track Member
Join Date: Nov 2008
Location: San Francisco
Posts: 846
Drives: 991.2 GT3
Rep Power: 18 ![]() ![]() |
![]()
My $45 rhinoramps worked like a charm! I had to use some wood to help out - used a 2 ft 2x10 piece on each side along with a carriage bolt that just dropped through a hole I drilled and into the ramps already existing hold.
My car is lowered on swifts and I didn't scrape at all. Well worth the money. Plus these ramps stack and can be stowed easily. Was able to install my front sway bar and oil cooler without hassle.
__________________
350z / 40th 370z / C6 Z06 / BMW M4 / V10 R8 / C7 Grand Spot / 997.1 GT3 / S2K / Camaro ZL1 / 718 GTS / 991.2 GT3 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Another DIY Ramp | B&W_Evader | DIY Section (Do-It-Yourself) | 7 | 04-19-2012 04:14 PM |
DIY 370Z Car Ramp Drawings | Cmike2780 | DIY Section (Do-It-Yourself) | 23 | 01-16-2012 09:50 PM |
Rino Ramp + 2X4 | cujo | DIY Section (Do-It-Yourself) | 5 | 11-24-2010 05:06 PM |
what is a 2x4 extension ramp? | zmyride | DIY Section (Do-It-Yourself) | 15 | 05-13-2010 10:30 PM |
Custom Ramp | YamahaR6 | Canada | 15 | 02-02-2010 10:30 PM |