DIY: how to make your headlights black housing with 20 bucks...

Dallaz

Now that the frustration is wearing off, I can go one of 2 routes tomorrow. I have heard to put it directly onto the rack at 200 degrees for roughly 10 minutes and that it would be just right, no melting issues. I thought that was risky, but after the rag we used was in the oven for a total of 22 minutes, it was still mostly cool, temperature wise.

And the silicone I could tell was soooo close to budging so most likely placing it directly onto the rack would do the trick, and in reality, about 1% of the headlight is actually making contact with the rack and its pretty thick pieces as well.


What would actually make contact w/ rack
ImageUploadedByTapatalk1359441926.860476.jpg

OR..........

I could put the light back on my tray & damp cloth at 240-250 for 8-10 minutes and hope that does the trick.

Work station
ImageUploadedByTapatalk1359441973.553811.jpg

ImageUploadedByTapatalk1359441985.437564.jpg

__________________
AeroJacket Lip Kit | GTR switch | NISMO S-Knob | Blacked-Out-EVERYTHING| 5% Tint | Carbon Fangs/Upper Trim | VOSSEN CV3's | Painted Headlights | CF Diffuser