DIY: how to make your headlights black housing with 20 bucks...

quagmire87 · 06-02-2010, 01:06 AM

it was very easy to do and easy to understand took me 9 hours. and on painting the shrouds just do some masking and you should be fine. im not spending hundreds of dollars to have this done when i can do it myself! thanks simota1 +rep!

here are some pics. let me know what you guys think.

simota1 · 06-02-2010, 09:21 AM

looks good bro

pompey · 06-02-2010, 10:39 AM

nice work!

gaveup · 08-31-2010, 10:57 AM

I see that you used black RTV to reseal the lights. To my knowledge this can not be reheated and pulled apart if you needed to get back inside the lights for whatever reason.

Does anyone know what the best product to reseal the headlights would be?

simota1 · 08-31-2010, 04:14 PM

Quote:

Originally Posted by gaveup

I see that you used black RTV to reseal the lights. To my knowledge this can not be reheated and pulled apart if you needed to get back inside the lights for whatever reason.

Does anyone know what the best product to reseal the headlights would be?

your correct... its cannot be reheated and removed.... maybe just dont remove the old sealer and reheat it so that itll fuse again? and maybe run clear silicon on the outside?

sexZness · 01-02-2011, 02:57 PM

Hey, Simota! Thanks for the diy

I'm gonna tackle the lights some time this week and see how it goes... but is it just as easy to do the rear lights?

simota1 · 01-02-2011, 04:07 PM

Quote:

Originally Posted by sexZness

Hey, Simota! Thanks for the diy

I'm gonna tackle the lights some time this week and see how it goes... but is it just as easy to do the rear lights?

it is impossible to do the rear lights.... dont do it... my friend ****** up his jdm tails the rear tails are pretty much super glued to hell.... or some kinda adhesive that DOES NOT come apart

Matthew · 01-02-2011, 05:09 PM

Hey thanks for this DIY Simota.i used it and my head lights turnd out great this is not as hard as you think. And it saved me monet to go to other mods.

Baer383 · 01-09-2011, 03:53 PM

for those of you doing this you can remove the chrome off the plastic housing with out ruining it,you use easy-off oven cleaner(yellow) top spray it on let sit for 1-2 hrs. rinse and repeat if necessary if done properly the housing will be clear when you are done giving you allot better surface for any paint to adhere.

Just thought you would like a tip

1slow370 · 01-13-2011, 04:45 AM

the stuff you should use to get them apart again is windshield adhesive, it melts near 200 somethin degrees which is how the get windows out. the tailights apear to be ultrasonic welded thermoplastic(they vibrate the top piece against the bottom piece until they melt together, it's like spin welding there is no glue)

Baer383 · 01-13-2011, 01:15 PM

Quote:

Originally Posted by 1slow370

the stuff you should use to get them apart again is windshield adhesive, it melts near 200 somethin degrees which is how the get windows out. the tailights apear to be ultrasonic welded thermoplastic(they vibrate the top piece against the bottom piece until they melt together, it's like spin welding there is no glue)

I work in a body shop and our company also does glass removal and install and the stuff they are using for the headlights is not windshield urethane is what is referred to as ribbon caulk or aka butyl tape.

JaredGraves · 01-15-2011, 04:02 AM

After a couple months of contemplating if I should do this or not, I jumped in and went for it. Took me a solid 12 hours (I enjoy taking my time) but it was WELL worth it. I cant stop looking at them!

I went with satin black housing, White Shrouds, and carbon Di Noc on the Reflectors.

Its really not difficult at all, just time consuming and boring in parts (removing old silicone) Just remember what the end result will look like!

many thanks Simota!

simota1 · 01-15-2011, 09:07 AM

Quote:

Originally Posted by JaredGraves

After a couple months of contemplating if I should do this or not, I jumped in and went for it. Took me a solid 12 hours (I enjoy taking my time) but it was WELL worth it. I cant stop looking at them!

I went with satin black housing, White Shrouds, and carbon Di Noc on the Reflectors.

Its really not difficult at all, just time consuming and boring in parts (removing old silicone) Just remember what the end result will look like!

many thanks Simota!

no problem buddy!!!

JaredGraves · 01-15-2011, 05:26 PM

A quick pic

SPOHN · 01-15-2011, 06:38 PM

^ Awesome. Can't wait to get to mine. I really hate the factory chrome.

06-02-2010, 09:21 AM	#62 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 404	looks good bro __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

01-09-2011, 03:53 PM	#69 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 29	for those of you doing this you can remove the chrome off the plastic housing with out ruining it,you use easy-off oven cleaner(yellow) top spray it on let sit for 1-2 hrs. rinse and repeat if necessary if done properly the housing will be clear when you are done giving you allot better surface for any paint to adhere. Just thought you would like a tip __________________ 2013 ZL1 754 rwhp 747 rwtq

01-13-2011, 04:45 AM	#70 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	the stuff you should use to get them apart again is windshield adhesive, it melts near 200 somethin degrees which is how the get windows out. the tailights apear to be ultrasonic welded thermoplastic(they vibrate the top piece against the bottom piece until they melt together, it's like spin welding there is no glue) __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

01-15-2011, 06:38 PM	#75 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	^ Awesome. Can't wait to get to mine. I really hate the factory chrome. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-02-2010, 10:39 AM	#63 (permalink)
pompey Banned Join Date: Mar 2010 Location: Tennessee Posts: 139 Drives: 2010 370Z 40th anniv Rep Power: 0	nice work!

08-31-2010, 10:57 AM	#64 (permalink)
gaveup Enthusiast Member Join Date: Aug 2010 Location: Tamarac FL Posts: 324 Drives: 10 Nissan 370Z MB M6 Rep Power: 180	I see that you used black RTV to reseal the lights. To my knowledge this can not be reheated and pulled apart if you needed to get back inside the lights for whatever reason. Does anyone know what the best product to reseal the headlights would be?

01-02-2011, 02:57 PM	#66 (permalink)
sexZness A True Z Fanatic Join Date: Dec 2010 Location: Dallas, TX Posts: 18,504 Drives: like it's stolen Rep Power: 107	Hey, Simota! Thanks for the diy I'm gonna tackle the lights some time this week and see how it goes... but is it just as easy to do the rear lights?

01-15-2011, 04:02 AM	#72 (permalink)
JaredGraves Base Member Join Date: Sep 2010 Location: Toowoomba, Australia Posts: 16 Drives: 10 370z white M6 Rep Power: 14	After a couple months of contemplating if I should do this or not, I jumped in and went for it. Took me a solid 12 hours (I enjoy taking my time) but it was WELL worth it. I cant stop looking at them! I went with satin black housing, White Shrouds, and carbon Di Noc on the Reflectors. Its really not difficult at all, just time consuming and boring in parts (removing old silicone) Just remember what the end result will look like! many thanks Simota!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] your oem headlights plus $200 for my black housing	im89	Parts for sale (Private Classifieds)	35	02-27-2012 01:54 PM
Housing headlights in vancouver area	hyunsoo1803	Canada	9	01-21-2012 05:06 AM
Looking to get headlights housing black out near Baltimore Area	tonybui	Exterior & Interior	0	09-26-2011 11:40 PM
Black housing headlights	im89	North East Region	5	08-31-2011 08:04 AM
SO i finally had the balls to do it.... $20 black housing headlights!!!!	simota1	Exterior & Interior	53	06-29-2009 12:14 AM