09-10-2018, 09:23 PM
|
#19 (permalink)
|
|
Base Member
Join Date: Jul 2017
Location: Pittsburgh
Posts: 32
Drives: 09 Z34 Black M
Rep Power: 9
|
Quote:
Originally Posted by l2iceman
Looking good! Regarding the sma projector for the turn signal, I thought people stopped doing this because having a projector there caused it to magnify sunlight heat and cause paint to bubble in front. Or was that due to bad prep work?
Sent from my SM-N920W8 using Tapatalk
|
Ya that is an issue and after sitting in the sun a little to much i got some melting/warping of the paint just below the projector. If i were to move it back a little more i think i could of prevented it. I though of wrapped the plastic just under it with either a clear piece or matching color to get around it. May do so if i take them apart again, or just wrap the whole damn thing.
Either way the headlight themselves are functioning grate, minus the morimoto demon eyes. I either missed the opening in the housing just by a few mm or the opening does not let enough light through.
If anyone wired a switch to manually turn them on or off via switch inside the cabin, let me know how and where you ran the +/- line to whereever inside the cabin.
|
|
|
Similar Threads
492Likes
Threaded Mode
