DIY: LED Halo w/Video's

edliaszenik

Rip

Nut_N_Much

So,
I have an extra set of lights i use to test ideas out on. Not sure if I saw this already or not. I did this with my turn signal to get crisp bright Demon Eye effect. So i did the same thing with the projector just to see what would happen. WTF am i talking about? Well i had an extra set of 40mm halos from TRS. So i pulled apart the projector and place the halo behind the leans and this is what it looked like.

Only had White 40mm, would be awesome with 40mm RGB color changing set. Took the lens out and glued it in 2 spots just to test out what it would look like.





Wow, looks like an inner halo inside the lens. Not bad! So I flipped it over with back of halo glued to lens so the light would reflect off the housing.





I like it, very strong demon eye, stronger than doing strips (image below) I think I will do this with RGB with color changing remote. So i can do this with the inside of the turn signal and the projecter and have strong Demon Eye Effect. Hope this helps.




Rep if you like - Thanks
Helpful Links:
Glue to reseal lights: OCI Butyl Rubber Glue
RGB W/Remote: Morimoto XC LED RGB Halos Angel Eyes


.

__________________

Did new cool science stuff to the car !!!
http://www.the370z.com/mazoc/99606-z...y-14-17-a.html
http://www.the370z.com/diy-section-d...-w-videos.html