|
Originally Posted by jmlenz any suggestions on easily removing those plastic pop rivets? I just used 2 flathead screwdrivers on either side and pulled like hell. I broke about 3
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
12-31-2009, 12:37 PM
|
#11 (permalink) | |
|
Base Member
 
Join Date: Jun 2009
Location: Austin, TX
Posts: 77
Drives: Nissan 370Z - Yellow
Rep Power: 17  |
Quote:
Take a thin screwdriver or a dull awl and push in the center of the plastic pop rivet. This will allow the rivet to be removed easily. Reinsertion: Push the small center pin through the rivet to the top (don't remove it, but it should be sticking out of the head of the pop rivet). Push the rivet back in the hole and then press the center pin into the rivet to lock it back in place |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Bumper/headlight removal questions | Slowfashow | Exterior & Interior | 4 | 01-05-2013 03:52 AM |
| Removal of Tailights!!! Front bumper off?? | jlbrenne | Nissan 370Z General Discussions | 5 | 08-17-2012 11:28 AM |
| Rear bumper removal? | Reaper42 | Exterior & Interior | 16 | 05-17-2012 09:47 PM |
| Pop up Engine Hood indicator - After bumper removal | AH370Z | Nissan 370Z General Discussions | 15 | 06-13-2011 11:01 AM |
| REQUEST: Front Bumper Removal | Cyberium | DIY Section (Do-It-Yourself) | 15 | 07-18-2010 01:43 PM |
35Likes
Threaded Mode
