Base/Sport to Nismo conversion/FRONT BUMPER Cost breakdown

tjlazer · 01-08-2013, 02:23 PM

I didn't use rivets, I used screws. I think the part # is listed. They just keep the piece attached to bumper.

scruffydog · 01-08-2013, 04:09 PM

Quote:

Originally Posted by tjlazer

I didn't use rivets, I used screws. I think the part # is listed. They just keep the piece attached to bumper.

gotcha! thanks for the help again. I am going to convert my car next month. I still have to collect these little hardware. Which ain't cheap. So I might be bothering you so more if you don't mind.

scruffydog · 02-10-2013, 04:35 PM

Anyone know what screws & nuts to use to attach bottom Fascia (Diffuser) to the Front Bumper Fascia?

In this diagram, it's showing to use 370z Body Clip for the application, but when I went to the dealership to check out a Nismo 370z, it's Screws.

This is what the OEM One looks like, anyone know the P/N for the Nut & the Hex Philips Machine Screw?

Anyone know which kind is it? I'm thinking it's the Left set, but the screw seems different than the OEM Nismo one, the washer seem smaller in Diameter. It problem isn't the Tapping Screw w/ Nut set.

I am using the Nut Clip from my rear bumper License plate.

Here's a comparison of the Tapping Screw w/ what's on the OEM Nismo 370z.
The OD of the washer is bigger than what's used.

I know some people used the Plastic Body Clip for their car, but I prefer to use the screw if I could.

Eagle · 02-10-2013, 10:55 PM

Quote:

Originally Posted by scruffydog

Anyone know which kind is it? I'm thinking it's the Left set, but the screw seems different than the OEM Nismo one, the washer seem smaller in Diameter. It problem isn't the Tapping Screw w/ Nut set.

I can take a picture of the ones used on my car and upload it when I have a chance. I did the same thing, sport to nismo conversion.

Just by going on my gut feeling, the left clip and the left most screw are what I have on my car right now with my nismo bumper.

scruffydog · 02-11-2013, 12:11 AM

I managed to use some body clips which held up the 2 piece together well enough. From a cost and weight saving perspective, I guess I will just use Body clips instead of the metal nut with screw.

01-08-2013, 02:23 PM	#1 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 20	I didn't use rivets, I used screws. I think the part # is listed. They just keep the piece attached to bumper. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

02-10-2013, 04:35 PM	#3 (permalink)
scruffydog A True Z Fanatic Join Date: Jan 2009 Location: Nor Cal Posts: 1,113 Drives: with his eyes close Rep Power: 718	Question: Screws for Front Fascia & Diffuser Anyone know what screws & nuts to use to attach bottom Fascia (Diffuser) to the Front Bumper Fascia? In this diagram, it's showing to use 370z Body Clip for the application, but when I went to the dealership to check out a Nismo 370z, it's Screws. This is what the OEM One looks like, anyone know the P/N for the Nut & the Hex Philips Machine Screw? Anyone know which kind is it? I'm thinking it's the Left set, but the screw seems different than the OEM Nismo one, the washer seem smaller in Diameter. It problem isn't the Tapping Screw w/ Nut set. I am using the Nut Clip from my rear bumper License plate. Here's a comparison of the Tapping Screw w/ what's on the OEM Nismo 370z. The OD of the washer is bigger than what's used. I know some people used the Plastic Body Clip for their car, but I prefer to use the screw if I could. __________________ Magnetic Black 2010 370z Scruffydog's Journal

02-11-2013, 12:11 AM	#5 (permalink)
scruffydog A True Z Fanatic Join Date: Jan 2009 Location: Nor Cal Posts: 1,113 Drives: with his eyes close Rep Power: 718	I managed to use some body clips which held up the 2 piece together well enough. From a cost and weight saving perspective, I guess I will just use Body clips instead of the metal nut with screw. __________________ Magnetic Black 2010 370z Scruffydog's Journal

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo front end conversion and Seibon CF GTR hood	370zFORme!!	Exterior & Interior	7	04-28-2012 11:23 AM
Nismo front bumper	tommyguns	Exterior & Interior	8	10-18-2011 11:48 AM
Front bumper re spray cost estimate	ddvette9	Exterior & Interior	11	10-11-2011 04:35 PM
I damage the front bumper cost to replace	sheps58	Exterior & Interior	5	08-24-2011 01:40 PM
FS:Stock Parts Black~Hood,Sideskirts,Front Bumper,Rear Bumper,Nismo Spoiler,Intakes	Tango	Parts for sale (Private Classifieds)	19	10-04-2010 08:25 PM