|
Originally Posted by weiboy718 would something like this work as a dual port output? GTM Motorsports*::*ENGINE EXTERNALS*::*OIL SENDER ADAPTER KIT Yes, but why pay $60 for a $5 part? Chris
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
04-02-2011, 10:31 AM
|
#1 (permalink) | |
|
A True Z Fanatic
Join Date: Mar 2009
Location: Naples, FL
Posts: 4,117
Drives: to work
Rep Power: 1858    |
Quote:
Chris is talking about a single sensor that both harnesses could connect to, thus negating the need for a t-adapter and both aftermarket and OEM sensors to cut down on hardware used. It would send both variable signal for exact voltage (for the aftermarket gauge) and a yes/no signal for the OEM bus to read as 'ok' or 'low pressure'. It's simpler to just use the T-adapter. An extension tube can be used if you want to mount the sender remotely a few inches away, but I'm not sure where you'd secure it.
__________________
2013 Cadillac V-Wagon, RIP Z Last edited by spearfish25; 04-02-2011 at 11:39 AM. |
|
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 370 oil pressure and AEM gauge | binto100 | Nissan 370Z General Discussions | 0 | 05-26-2010 07:04 PM |
| Oil Pressure Gauge | jpit | Engine & Drivetrain | 3 | 03-16-2010 09:33 PM |
| Oil Pressure Gauge | jpit | Exterior & Interior | 6 | 03-07-2010 08:36 PM |
| Oil Pressure Gauge | 37Z | Exterior & Interior | 0 | 06-14-2009 09:21 PM |
| What happened to the tire pressure gauge and speedo in the middle gauge cluster? | rbratton | Nissan 370Z General Discussions | 33 | 01-24-2009 10:28 PM |
52Likes
Hybrid Mode
