wow awesome, im going to do this when I take the car out!

+repd

Nice Job Bro!!:tup:

All Finish!! Do whateva u want!! (Paint or Replace with others)
I swapped mine with Simot1's CF door handles. Thanks Simot!!

http://www.the370z.com/members/bumbl...1-img-0397.jpg



You got these handles from where? can i get some as well? They look Awsome!

looks awesome. ill be painting mine black this week. +rep

Thanks for adding the pics

+1rep

Looks awesome :tup: I also have a magnetic black z that I want to have matching handles. Could you tell me what you used (type of paint, exact color, coats, clear etc...)?

Gents,

I'm having an issue with that 2nd bolt on the drivers side door handle. Being that its to the right, I cannot get firm traction with my screw drive or socket wrench. Was there any specialized tool that you used??? I want to avoid stripping the screw......

Thanks

Bump. Really could use some pointers regarding the 2nd bolt on the drivers side before I rip the door handle off........

I used a 10mm 1/4 drive short socket with an extension? I loosened the bolt just before it was totally free and used a Magnet on the extension to hold the bolt to the socket and pulled it out. I recommend you make sure you have the bolt attached to the socket when pulling it out while magnetized, this is to make sure you don't drop the 10mm bolt in the door frame. The driver side door handle has a hex head bolt that also needs to be removed its just below the door jam.


http://www.the370z.com/members/thezm...ve-install.jpg


http://www.the370z.com/members/thezm...ve-install.jpg




http://www.the370z.com/members/thezm...ve-install.jpg

Triples your the man. There was no mentioning of that hex nut. The door handle has now been removed......:happydance:

hey this may be a dumb question but i cant get the black wire plate off to save life wat did you guys use to get the black wire free

if it's the tab i think you're talking about, you just gotta yank it out...don't try to prevent damage to it 'cause it will never come out that way! Can't remember, but i think i may have pryed it a little with a screwdriver. Even so, i was still able to re-use the tab; it wasn't that damaged.

its the plate holding the black wire on to the door handle, and its the screws i cant get out

excellent post, doing mine in spring, car sleeping now :yawn:

ah, the wire for the electronic door lock yes? That will remain attached to the door handle; you will need to unplug the harness which sits inside the door.