Nissan 370Z Forum - tried to remove door handle...Fail

Nissan 370Z Forum (http://www.the370z.com/)

- DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)

- - tried to remove door handle...Fail (http://www.the370z.com/diy-section-do-yourself/22978-tried-remove-door-handle-fail.html)

Soon	08-02-2010 01:17 PM

tried to remove door handle...Fail

I tried to remove the door handles but i cant get to the 10mm screw on the right hand side on the drivers side in the lower opening hole, how the hell can you even reach it though that little hole.its way off to the right a wrench aint working and a philips angle wont work either...

anyone...?:shakes head:

zZSoCalZz

08-02-2010 01:36 PM

I believe there's a DIY about this and the dude who did it said right side was a pita to do.

Caravanshaka

08-02-2010 01:48 PM

I have taken them off and had no trouble at all. Only used a 10mm and a straight extension to get to all of the bolts. Not sure which one you are talking about?

Soon	08-02-2010 04:00 PM

Quote:

Originally Posted by Caravanshaka (Post 656086)

I have taken them off and had no trouble at all. Only used a 10mm and a straight extension to get to all of the bolts. Not sure which one you are talking about?

okay now correct me if im wrong...on the drivers side there's 1 screw on the top and two screws on the bottom that have to be taken out right?

Caravanshaka

08-02-2010 04:03 PM

that sounds correct from memory. There is also a small screw in the door jamb that holds the lock in place that will need to be removed as well.

All times are GMT -5. The time now is 12:54 PM.