DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)

SurfDog · 04-01-2015, 03:02 AM

subd mine coming in the mail.

1LL1CIT · 04-01-2015, 09:31 AM

Just installed mine yesterday...love it! Thanks for the guide.

FairladyZ10PG · 06-10-2015, 03:47 PM

Very nice write up!

It guided me through my installation

140BPM · 08-19-2015, 01:46 AM

Gonna do this in a few days but had a question...

Does the Gen3 have any brackets to anchor the tubes anywhere inside the engine compartment or do they just attach at the TBs with the front filters resting inside the the bumper? Or is it the front core support holes that provide support?

In my past experiences most intakes have some sort of tab or arm that bolts too the engine bay or front support, but after reading this thread there is no mention of a support piece.

Zbrah · 08-19-2015, 02:17 AM

None that I remember. The pipes are attached to the TBs and the air filters at each end. Make sure to wrap your AC lines with some rubber material to prevent damage from the intake tubes rubbing against it.

Zbrah · 08-19-2015, 02:21 AM

Quote:

Originally Posted by FairladyZ10PG

Very nice write up!

It guided me through my installation

It wasn't so bad was it. Did you wrap your AC lines?

I bought new AEM dry filters to replace the oiled ones so I'll be pulling off my front bumper again soon.

Slynky · 08-19-2015, 07:46 AM

Quote:

Originally Posted by Zbrah

It wasn't so bad was it. Did you wrap your AC lines?

I bought new AEM dry filters to replace the oiled ones so I'll be pulling off my front bumper again soon.

Need to do the same...

The kit came with AEM dry filters, didn't it? Do you have the order description handy to share? What did they cost?

FairladyZ10PG · 08-19-2015, 11:39 AM

Quote:

Originally Posted by Zbrah

It wasn't so bad was it. Did you wrap your AC lines?

I bought new AEM dry filters to replace the oiled ones so I'll be pulling off my front bumper again soon.

Nothing I can't manage

and yes I wrapped it very tight

Zbrah · 08-19-2015, 03:49 PM

Quote:

Originally Posted by Slynky

Need to do the same...

The kit came with AEM dry filters, didn't it? Do you have the order description handy to share? What did they cost?

I think if you order the intake from Stillen there may be an option to choose the dry filters or just simply ask them for the option, otherwise you're getting the oiled types.

I can snap a photo of the product # for you later. I ordered it straight from AEM but they were out of stock for over a month. Cost was roughly $70 for two dry filters.

Zbrah · 08-19-2015, 03:50 PM

Quote:

Originally Posted by FairladyZ10PG

Nothing I can't manage

and yes I wrapped it very tight

FairladyZ10PG · 08-19-2015, 04:25 PM

I got the dry filters

Zbrah · 08-19-2015, 06:27 PM

Quote:

Originally Posted by FairladyZ10PG

I got the dry filters

Nice. No need to re-oil the damn thing

140BPM · 08-22-2015, 08:42 PM

Installing mine now and ran into a slight issue. My passenger filter (dry filters btw) is all the way up against the sharp lip on the center bracket.

In all of the install threads and pics I've seen there appears to be some space here, although minimal. I can't find anything else out of place. Is this normal with the AEM dry filters? Should I be worried about that edge cutting into the filter over time?

Zbrah · 08-23-2015, 01:35 AM

Quote:

Originally Posted by Slynky

Need to do the same...

The kit came with AEM dry filters, didn't it? Do you have the order description handy to share? What did they cost?

Stillen Gen III Intake Filter Replacement

I ordered the same filters posted in this thread.

critical · 08-23-2015, 02:55 AM

get aFe pro 5 r's. they fit better too

04-01-2015, 03:02 AM	#226 (permalink)
SurfDog A True Z Fanatic Join Date: May 2012 Location: Colorado (9000 feet) Age: 57 Posts: 1,796 Drives: 09 6mt, 13 Sequoia, Rep Power: 15750	subd mine coming in the mail. __________________ 09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

06-10-2015, 03:47 PM	#228 (permalink)
FairladyZ10PG A True Z Fanatic Join Date: Aug 2010 Location: SoCal-IE Posts: 1,890 Drives: PGraphite m6 Rep Power: 255	Very nice write up! It guided me through my installation Zbrah likes this. __________________ ///MPPSK///M Performance FRONT SPLITTER///M Performance KIDNEY GRILLS///MPerformance CF MIRRORS///MPerformance CF SPOILER///AC SCHNITZER

08-19-2015, 01:46 AM	#229 (permalink)
140BPM Base Member Join Date: May 2014 Location: Harrisburg, PA Posts: 55 Drives: 2009 Nissan 370Z Rep Power: 12	Gonna do this in a few days but had a question... Does the Gen3 have any brackets to anchor the tubes anywhere inside the engine compartment or do they just attach at the TBs with the front filters resting inside the the bumper? Or is it the front core support holes that provide support? In my past experiences most intakes have some sort of tab or arm that bolts too the engine bay or front support, but after reading this thread there is no mention of a support piece. __________________ 2009 370Z Touring w/Sport 6MT

08-19-2015, 02:17 AM	#230 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5453	None that I remember. The pipes are attached to the TBs and the air filters at each end. Make sure to wrap your AC lines with some rubber material to prevent damage from the intake tubes rubbing against it. __________________

08-19-2015, 04:25 PM	#236 (permalink)
FairladyZ10PG A True Z Fanatic Join Date: Aug 2010 Location: SoCal-IE Posts: 1,890 Drives: PGraphite m6 Rep Power: 255	I got the dry filters __________________ ///MPPSK///M Performance FRONT SPLITTER///M Performance KIDNEY GRILLS///MPerformance CF MIRRORS///MPerformance CF SPOILER///AC SCHNITZER

04-01-2015, 09:31 AM	#227 (permalink)
1LL1CIT Base Member Join Date: Sep 2014 Location: North Florida Posts: 4 Drives: 2012 370Z PW A7 Rep Power: 11	Just installed mine yesterday...love it! Thanks for the guide.

08-22-2015, 08:42 PM	#238 (permalink)
140BPM Base Member Join Date: May 2014 Location: Harrisburg, PA Posts: 55 Drives: 2009 Nissan 370Z Rep Power: 12	Installing mine now and ran into a slight issue. My passenger filter (dry filters btw) is all the way up against the sharp lip on the center bracket. In all of the install threads and pics I've seen there appears to be some space here, although minimal. I can't find anything else out of place. Is this normal with the AEM dry filters? Should I be worried about that edge cutting into the filter over time? __________________ 2009 370Z Touring w/Sport 6MT

08-23-2015, 02:55 AM	#240 (permalink)
critical A True Z Fanatic Join Date: Oct 2012 Location: Washington Posts: 1,252 Drives: 09' 370z 7AT Rep Power: 16	get aFe pro 5 r's. they fit better too __________________ Quaife w/ gears \|Stillen Gen 3\|SOLD FI Resonated Test Pipes \|SOLD FI 18'' \| 25row Stillen Race \| Progress 35mm/25mm sways \| Swifts/Koni\|Volk G25's\| Stoptech SS lines\|\|SPL Front/Rear Arms\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujimura cf Rear diffuser installed! (with pics)( AK370Z)	AK370Z	Exterior & Interior	73	04-24-2016 04:47 PM
Finally Got my exhaust! HKS Hi-Power Ti Exhaust (many Pics, Video inside AK370Z)	AK370Z	Intake/Exhaust	102	05-11-2013 01:32 PM
Finally Fully Detailed My 370Z with Porter Cable (AK370Z) 90+ pics inside	AK370Z	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	24	06-11-2011 08:48 PM
finally amuse stti extra exhaust arrived + lots of pics	zuperman 370	Intake/Exhaust	22	03-16-2011 12:25 AM
Installed my Stillen G3s. lots of pics and a short review	ssqpolo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	45	09-23-2009 03:20 PM