DIY: Homelink install in a Base/Nismo

Aggie

Me too. Dang it.

Jayhovah

The pics weren't all that necessary.. I was able to get the stock mirror off and run the wiring for the Gentex 453 pretty easily.

The stock mirror comes off as described. The A-Pillar comes off easily too - just grab the top and pull, it will come loose. Find the middle clip which is hooked in the pillar, turn the plastic ribbon 90 degrees with needle nose pliers to release it. Then, just pull the pillar up and out and it will come right out. From there you can just run the wiring down to the fuse box and tuck under the headliner and you are good to go!

The plastic finisher I got from Nissan appears to be generic and adjustable, I think you might as well buy a wiring kit off ebay that comes with the finisher.

Good luck!

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted