03-17-2009, 01:14 PM
|
#11 (permalink)
|
|
A True Z Fanatic
Join Date: Mar 2009
Location: Houston, TX
Posts: 4,024
Drives: too slow
Rep Power: 3596
|
Quote:
Originally Posted by semtex
For the A-pillar, take a flat screwdriver and use it to gently pry the top of the cover. It's a little scary at first, but with a little pressure it pops right off. Also, there's no need to pop the cover right off. Just pull it back enough to get the wire behind it. Be careful not to obstruct the airbag that's rolled up in there with the wire. The cover just snaps back in.
|
Forgot to reply earlier, but I did get this to work, thanks. Once you pop the A-pillar loose as noted above, it's pretty easy to drop the wire through and have it come out under the passenger-side dash (I used a bit of stiff wire taped to the cord to push it through initially).
|
|
|
Similar Threads
Threaded Mode
