DIY: Berk Technology HFC Install

Rooskey · 08-27-2010, 12:29 AM

Just did this mod tonight. I HIGHLY recommend using 1/2" drive ratchet and extensions for the two ft of extensions for the top bitch bolts. It was like day and night trying to use the 3/8's compared to the 1/2". Do not use an impact because there is to much energy wasted through the extension's. PB Blaster is the **** too (let it soak in for a while too). If you have a nismo with the H-pipe like my self you shouldn't have to unbolt the rest of the exhaust like mentioned. If I had to do this again I would recommend buying new gaskets for the Y/H-pipe as well. I really enjoy wrenching on cars and this product is not a bad DIY project if you use the right tools.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Berk Technology Earth Day HFC Sale!!!	BerkTech	Exhaust/Intake	8	04-16-2012 01:46 PM
Berk Technology Cat-Back Coming Soon!	M.Bonanni	Intake/Exhaust	468	08-14-2009 09:36 PM

08-27-2010, 12:29 AM	#11 (permalink)
Rooskey Track Member Join Date: Jul 2010 Location: South Carolina Posts: 974 Drives: 2014 Alpha7 GTR Rep Power: 18	Just did this mod tonight. I HIGHLY recommend using 1/2" drive ratchet and extensions for the two ft of extensions for the top bitch bolts. It was like day and night trying to use the 3/8's compared to the 1/2". Do not use an impact because there is to much energy wasted through the extension's. PB Blaster is the **** too (let it soak in for a while too). If you have a nismo with the H-pipe like my self you shouldn't have to unbolt the rest of the exhaust like mentioned. If I had to do this again I would recommend buying new gaskets for the Y/H-pipe as well. I really enjoy wrenching on cars and this product is not a bad DIY project if you use the right tools.