DIY: Berk Technology HFC Install

Rooskey · 08-27-2010, 12:29 AM

Just did this mod tonight. I HIGHLY recommend using 1/2" drive ratchet and extensions for the two ft of extensions for the top bitch bolts. It was like day and night trying to use the 3/8's compared to the 1/2". Do not use an impact because there is to much energy wasted through the extension's. PB Blaster is the **** too (let it soak in for a while too). If you have a nismo with the H-pipe like my self you shouldn't have to unbolt the rest of the exhaust like mentioned. If I had to do this again I would recommend buying new gaskets for the Y/H-pipe as well. I really enjoy wrenching on cars and this product is not a bad DIY project if you use the right tools.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Berk Technology Earth Day HFC Sale!!!	BerkTech	Exhaust/Intake	8	04-16-2012 01:46 PM
Berk Technology Cat-Back Coming Soon!	M.Bonanni	Intake/Exhaust	468	08-14-2009 09:36 PM

08-27-2010, 12:29 AM	#11 (permalink)
Rooskey Track Member Join Date: Jul 2010 Location: South Carolina Posts: 974 Drives: 2014 Alpha7 GTR Rep Power: 18	Just did this mod tonight. I HIGHLY recommend using 1/2" drive ratchet and extensions for the two ft of extensions for the top bitch bolts. It was like day and night trying to use the 3/8's compared to the 1/2". Do not use an impact because there is to much energy wasted through the extension's. PB Blaster is the **** too (let it soak in for a while too). If you have a nismo with the H-pipe like my self you shouldn't have to unbolt the rest of the exhaust like mentioned. If I had to do this again I would recommend buying new gaskets for the Y/H-pipe as well. I really enjoy wrenching on cars and this product is not a bad DIY project if you use the right tools.