|
Get whatever you can at your local hard ware store. I did the exact same thing to mine and replacing them with whatever off the shelf screw is just fine.
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
06-04-2013, 12:02 PM
|
#35 (permalink) |
|
A True Z Fanatic
 Join Date: Feb 2011
Location: Irvine
Posts: 1,682
Drives: 13 PW sport 6mt
Rep Power: 20   |
Get whatever you can at your local hard ware store. I did the exact same thing to mine and replacing them with whatever off the shelf screw is just fine. They're just holding on metal plates anyway. You don't have to get the EXACT same screw. Hope this helps.
Edit: and if you can't find the right length then just buy it long and cut it down.
__________________
35% Hooper Optik | Takeda Attack CAI | F.I. HFC | Hotchkis Sway Bar | Stillen 24row | OS Giken Super Lock LSD | TK Shift Knob | EVO-R Carbon Diffuser
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Door Panel Removal & Door Speaker Size | jikhead | DIY Section (Do-It-Yourself) | 46 | 07-16-2016 10:04 PM |
| Door Handles Question | boomboom | Exterior & Interior | 11 | 03-03-2010 05:08 PM |
| door handles | polarity | Exterior & Interior | 18 | 09-19-2009 07:52 PM |
| Door handles. | Forumite | Nissan 370Z General Discussions | 17 | 05-20-2009 07:07 PM |
| Door handles | ATC5079 | Exterior & Interior | 15 | 05-13-2009 07:50 PM |
3Likes
Threaded Mode
