DIY: Rearview Camera & DVD

Zyonara · 03-10-2010, 01:41 AM

After months of debating, I finally pulled the trigger on purchasing the NAVtool, I got lucky and found one at a local stereo shop that was going out of business, so for $210 they sold me the NAVtool and a keyhole rearview camera.

NAVTOOL INC

I popped out the little blue square for my camera.

drilled a hole in square to mount camera.

Plug square back in and route wires into the trunk area.

Wrap wires and route to cabin.

Remove radio and nav monitor.

unplug harness from back of monitor.

plug in Y-harness that comes with the NAVtool.

follow wires going into left rear taillight and tap into orange reverse light wire.

solder and heat shrink.

in the black plug that connects to the center console, tap into the yellow wire for acc/on power (note: there are only 2 wires connected to this plug, a black and a yellow wire.

While I was in there, I went ahead and tapped into the same acc/on wire for my radar detector and dvd player.

out of the NAVtool, connect the green, black, and 2-white wires to a suitable ground, I chose a bolt on the e-brake plate. Connect the blue wire and positive camera wire to the wire you used to tap into the orange reverse light wire. Notice the black/red wire on passenger seat, that is the toggle switch that will allow you to bypass factory screen for a connected video supply, I have a DVD player for the bypass.

You can put the module in the center console, but I chose to mount it behind my driver seat with two-sided tape.

Clean everything up and enjoy!

Camera automatically turns on when shifting into reverse.

Kill Bill 2 for my passenger with e-brake down and in gear!
Hope this DIY was helpful for my fellow Z owners!

quagmire87 · 03-10-2010, 02:30 AM

wow nice!

ducky · 03-10-2010, 04:09 AM

so the camera came with the navtool? which mean dont need the nissan rearview camera..cool im on this asap..nice write up

Zyonara · 03-10-2010, 07:50 AM

Quote:

Originally Posted by ducky

so the camera came with the navtool? which mean dont need the nissan rearview camera..cool im on this asap..nice write up

Camera was seperate, it was a clearance item at the shop I bought it from.

z370z · 03-10-2010, 07:59 AM

Great DIY! I've been looking into the navtool for months, guess it's time to finally pull the trigger! Thanks

Jeffblue · 03-10-2010, 08:11 AM

I called navtool, and despite their site saying it works for the 09-10 model 370z, it only works for the 2009. The guy said they are working on a fix so it will work for the 2010. He said to call back in a month or two. If i find out anything else i'll let you guys know.

Thanks for putting this write up... up. it was very helpful and i plan to use it once i get my Z and my navtool

Chriz · 03-10-2010, 01:36 PM

I have the same iphone case!...Great writeup haha.

Hugoneus · 03-10-2010, 02:12 PM

Great Job!

I too called NAV TOOL, their existing models DO NOT WORK WITH 2010 systems.

rarwz · 03-11-2010, 08:11 PM

Would love to see some pictures, was going to pull the trigger next paycheck on this.
Do you have to plug the NAVTOOL in behind the screen, or could you plug it in at the bose nav unit in the trunk? I would assume it would be be an easier install if the NAVTOOL was in the trunk.

Zyonara · 03-11-2010, 11:05 PM

Quote:

Originally Posted by rarwz

Would love to see some pictures, was going to pull the trigger next paycheck on this.
Do you have to plug the NAVTOOL in behind the screen, or could you plug it in at the bose nav unit in the trunk? I would assume it would be be an easier install if the NAVTOOL was in the trunk.

it plugs directly behind the monitor with a Y-adapter, It was very easy to install. If I can do it, anyone can. You don't see the pics in this DIY?

rarwz · 03-12-2010, 04:03 AM

Quote:

Originally Posted by Zyonara

it plugs directly behind the monitor with a Y-adapter, It was very easy to install. If I can do it, anyone can. You don't see the pics in this DIY?

Nope, I dont see them. Looking through the HTML I see that there are IMG tags for the pictures, but even going to them individually they dont work (aka if I go to http://www.the370z.com/members/gamma...11659-i005.jpg nothing loads)

I did find the gallery though Nissan 370Z Forum - Zyonara's Album: Rearview cam and DVD player but the pictures definitely dont load up inline for me... anyone else?

z370z · 03-12-2010, 07:55 AM

The first time i read this thread they showed up, however they don't anymore.

jagodago · 03-12-2010, 05:38 PM

So this might be a stupid question but how did you remove the square thing from the bumper? My basic question is do you have to go in from the back or just slip a knife or something in there and pop it out.

Zyonara · 03-13-2010, 01:40 AM

Quote:

Originally Posted by jagodago

So this might be a stupid question but how did you remove the square thing from the bumper? My basic question is do you have to go in from the back or just slip a knife or something in there and pop it out.

pop it out from the bottom edge of the square with something plastic.

Zyonara · 03-14-2010, 06:55 PM

Quote:

Originally Posted by z370z

The first time i read this thread they showed up, however they don't anymore.

Sorry guys, AK370Z had to help me fix the picture issue. It should be back up now, let me know if its not.

03-10-2010, 01:41 AM	#1 (permalink)
Zyonara Base Member Join Date: Nov 2009 Location: Hughesville, MD Posts: 31 Drives: 09 370z TouringSport Rep Power: 16	DIY: Rearview Camera & DVD After months of debating, I finally pulled the trigger on purchasing the NAVtool, I got lucky and found one at a local stereo shop that was going out of business, so for $210 they sold me the NAVtool and a keyhole rearview camera. NAVTOOL INC I popped out the little blue square for my camera. drilled a hole in square to mount camera. Plug square back in and route wires into the trunk area. Wrap wires and route to cabin. Remove radio and nav monitor. unplug harness from back of monitor. plug in Y-harness that comes with the NAVtool. follow wires going into left rear taillight and tap into orange reverse light wire. solder and heat shrink. in the black plug that connects to the center console, tap into the yellow wire for acc/on power (note: there are only 2 wires connected to this plug, a black and a yellow wire. While I was in there, I went ahead and tapped into the same acc/on wire for my radar detector and dvd player. out of the NAVtool, connect the green, black, and 2-white wires to a suitable ground, I chose a bolt on the e-brake plate. Connect the blue wire and positive camera wire to the wire you used to tap into the orange reverse light wire. Notice the black/red wire on passenger seat, that is the toggle switch that will allow you to bypass factory screen for a connected video supply, I have a DVD player for the bypass. You can put the module in the center console, but I chose to mount it behind my driver seat with two-sided tape. Clean everything up and enjoy! Camera automatically turns on when shifting into reverse. Kill Bill 2 for my passenger with e-brake down and in gear! Hope this DIY was helpful for my fellow Z owners! DIGItonium, Mr_Wond3rful and Scumbagrobert like this. Last edited by Zyonara; 03-14-2010 at 06:51 PM.

03-10-2010, 01:36 PM	#7 (permalink)
Chriz Track Member Join Date: Dec 2009 Location: Houston TX Posts: 626 Drives: '10 370z PW 7AT Rep Power: 17	I have the same iphone case!...Great writeup haha. __________________ PW 7AT w/Sports Pkg Hook Em!

03-10-2010, 02:12 PM	#8 (permalink)
Hugoneus Base Member Join Date: Feb 2010 Location: Milky Way Posts: 245 Drives: 2010 370z T+S+N 6MT Rep Power: 16	Great Job! I too called NAV TOOL, their existing models DO NOT WORK WITH 2010 systems. __________________ 2010 Cherry Black Nissan 370z + Black Interior + 6MT Touring + Sport + Navigation + Painted Splash Guards + Illuminated Kick Plates + Fog Light + Floor Mats + Clear Bra

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Rearview Mirror Removal/Installation	jikhead	DIY Section (Do-It-Yourself)	9	05-06-2013 02:43 PM
Rearview Camera and DVD	Zyonara	Audio & Video	10	03-10-2010 11:22 PM
Rearview mirror	cab83_750	Audio & Video	9	02-19-2010 05:42 PM
? Re: Compass in homelink rearview mirror	Danny3.7	Exterior & Interior	11	01-28-2010 02:29 PM
what is your choice of slr camera	thispecialk	The Lounge (Off Topic)	60	07-29-2009 01:46 PM

03-10-2010, 02:30 AM	#2 (permalink)
quagmire87 Enthusiast Member Join Date: Oct 2009 Location: chicago illinois Posts: 428 Drives: 09 370z Bs Mt Rep Power: 16	wow nice!

03-10-2010, 04:09 AM	#3 (permalink)
ducky Enthusiast Member Join Date: Aug 2009 Location: SinCity Posts: 437 Drives: 370z and s2000 Rep Power: 16	so the camera came with the navtool? which mean dont need the nissan rearview camera..cool im on this asap..nice write up

03-10-2010, 07:59 AM	#5 (permalink)
z370z Base Member Join Date: Jan 2010 Location: Niagara Posts: 222 Drives: 09 370z 6M SPT/NAV Rep Power: 16	Great DIY! I've been looking into the navtool for months, guess it's time to finally pull the trigger! Thanks

03-10-2010, 08:11 AM	#6 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 37 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 38	I called navtool, and despite their site saying it works for the 09-10 model 370z, it only works for the 2009. The guy said they are working on a fix so it will work for the 2010. He said to call back in a month or two. If i find out anything else i'll let you guys know. Thanks for putting this write up... up. it was very helpful and i plan to use it once i get my Z and my navtool

03-11-2010, 08:11 PM	#9 (permalink)
rarwz Base Member Join Date: Mar 2010 Location: 370z Posts: 178 Drives: 09 Touring Rep Power: 16	Would love to see some pictures, was going to pull the trigger next paycheck on this. Do you have to plug the NAVTOOL in behind the screen, or could you plug it in at the bose nav unit in the trunk? I would assume it would be be an easier install if the NAVTOOL was in the trunk.

03-12-2010, 07:55 AM	#12 (permalink)
z370z Base Member Join Date: Jan 2010 Location: Niagara Posts: 222 Drives: 09 370z 6M SPT/NAV Rep Power: 16	The first time i read this thread they showed up, however they don't anymore.

03-12-2010, 05:38 PM	#13 (permalink)
jagodago Base Member Join Date: Oct 2009 Location: Austin, Tx Posts: 14 Drives: 09-370Z-Black-7spd Rep Power: 16	So this might be a stupid question but how did you remove the square thing from the bumper? My basic question is do you have to go in from the back or just slip a knife or something in there and pop it out.