05-09-2021, 10:18 AM
|
#3 (permalink)
|
|
Enthusiast Member
Join Date: Apr 2013
Location: Kimberley, BC, CANADA
Posts: 453
Drives: 13 370Z BS M6 Sport
Rep Power: 440
|
Quote:
Originally Posted by Rusty
Flush to almost 1/16" deep in the front. You may have to install the diff to see if you can start the 2 front bolts to see if it's in the right spot. You want to snug up the rear nut and then try installing the front bolts. If you have trouble installing the front bolts. You may have to move the bushing in either direction. You always want that rear nut snug first. Because then the bushing is fitting into the taper of the stud.
|
Thanks Rusty! Any idea about the black metal washers that sit atop the stock front bushings? Should they be re-used or discarded? The instructions provided by Z1 make no mention of them.
|
|
|
Similar Threads
2Likes
Threaded Mode
