Beep Beep

thatguy420 · 06-16-2018, 08:18 AM

Hey guys
Just wondering if anyone could throw some knowledge this way!

The Issue I have with my car at the moment is the beeping that goes off when the car is in acc mode with the door open.

So how do I go about silencing that warning?

I don't want to loose any door opening and closing features! Everything else still has to function as normal

There must be a wire going from the body control module to a speaker.

Any tips out there? Has anyone done this before?
Cheers

Sent from my S30 using Tapatalk

SouthArk370Z · 06-16-2018, 09:06 AM

If you can find a copy of the FSM (Nissan recently had copies taken down), it will have wiring diagrams, harness routing, wire colors, etc.

I doubt that the speaker can be easily disabled (the speaker probably sounds for several different "alarms"), but worth a try.

Good luck.

thatguy420 · 06-16-2018, 11:34 AM

Quote:

Originally Posted by SouthArk370Z

If you can find a copy of the FSM (Nissan recently had copies taken down), it will have wiring diagrams, harness routing, wire colors, etc.

I doubt that the speaker can be easily disabled (the speaker probably sounds for several different "alarms"), but worth a try.

Good luck.

Thanks for the reply I'll do some digging and see what I can come up with

Sent from my S30 using Tapatalk

thatguy420 · 06-16-2018, 11:36 AM

Does anyone know what section of the manual the module would be hiding in?

Sent from my S30 using Tapatalk

thatguy420 · 06-16-2018, 12:03 PM

Am I right ?

118 p for the brake switch(burnout switch)
Maybe 150 gr for the door switch
But that would prob cut all door features, so feel like I have to try find more info as to what wire from bcm to speaker

Sent from my S30 using Tapatalk

SouthArk370Z · 06-16-2018, 01:14 PM

It looks like 118P will allow burnouts with the brakes on. There is at least one DIY on this site where you can verify.

The door switch would be one of the last places I would mod to get rid of the beeper - too many other things that depend on that switch.
Now that you have the FSM, you should be able to figure out what inputs are required for the beeper to go off. Maybe you can disable one of the other inputs.

thatguy420 · 06-16-2018, 01:49 PM

I couldn't find that diy could you post a link to it if you know where brake diy is hiding

Sent from my S30 using Tapatalk

SouthArk370Z · 06-16-2018, 05:04 PM

There's a diagram at How to completely disable the VDC . Put the switch in the wire marked "cut here".

Found it by going to DuckDuckGo and adding "site:the370z.com" to my search string. IIRC, I searched for "brake +light +burn site:the370z.com"

thatguy420 · 06-20-2018, 07:36 AM

Back to the door buzzer, someone asked if its possible to go into the bcm and turn off said warning!
Anyone used a programme to enter a control module and modify preferences?

Sent from my S30 using Tapatalk

06-16-2018, 08:18 AM	#1 (permalink)
thatguy420 Base Member Join Date: Apr 2018 Location: perth Posts: 7 Drives: 09 370z Rep Power: 7	Beep Beep Hey guys Just wondering if anyone could throw some knowledge this way! The Issue I have with my car at the moment is the beeping that goes off when the car is in acc mode with the door open. So how do I go about silencing that warning? I don't want to loose any door opening and closing features! Everything else still has to function as normal There must be a wire going from the body control module to a speaker. Any tips out there? Has anyone done this before? Cheers Sent from my S30 using Tapatalk

06-16-2018, 09:06 AM	#2 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	If you can find a copy of the FSM (Nissan recently had copies taken down), it will have wiring diagrams, harness routing, wire colors, etc. I doubt that the speaker can be easily disabled (the speaker probably sounds for several different "alarms"), but worth a try. Good luck. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

06-16-2018, 01:14 PM	#6 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	It looks like 118P will allow burnouts with the brakes on. There is at least one DIY on this site where you can verify. The door switch would be one of the last places I would mod to get rid of the beeper - too many other things that depend on that switch. Now that you have the FSM, you should be able to figure out what inputs are required for the beeper to go off. Maybe you can disable one of the other inputs. thatguy420 likes this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

06-16-2018, 05:04 PM	#8 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	There's a diagram at How to completely disable the VDC . Put the switch in the wire marked "cut here". Found it by going to DuckDuckGo and adding "site:the370z.com" to my search string. IIRC, I searched for "brake +light +burn site:the370z.com" thatguy420 likes this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
beep beep beep from dash area	Limeybastard	Nissan 370Z General Discussions	8	08-01-2014 01:18 PM
I want the beep from button off?	YzGyz	Audio & Video	4	08-24-2013 02:09 AM
door lock beep	bigZ	Exterior & Interior	18	05-05-2011 06:40 AM
High pitched beep from front of car.	gh0st3794	Nissan 370Z General Discussions	5	04-03-2010 12:31 AM
No beep?	zentropy	Nissan 370Z General Discussions	7	03-18-2010 03:46 PM

06-16-2018, 11:36 AM	#4 (permalink)
thatguy420 Base Member Join Date: Apr 2018 Location: perth Posts: 7 Drives: 09 370z Rep Power: 7	Does anyone know what section of the manual the module would be hiding in? Sent from my S30 using Tapatalk

06-16-2018, 12:03 PM	#5 (permalink)
thatguy420 Base Member Join Date: Apr 2018 Location: perth Posts: 7 Drives: 09 370z Rep Power: 7	Am I right ? 118 p for the brake switch(burnout switch) Maybe 150 gr for the door switch But that would prob cut all door features, so feel like I have to try find more info as to what wire from bcm to speaker Sent from my S30 using Tapatalk

06-16-2018, 01:49 PM	#7 (permalink)
thatguy420 Base Member Join Date: Apr 2018 Location: perth Posts: 7 Drives: 09 370z Rep Power: 7	I couldn't find that diy could you post a link to it if you know where brake diy is hiding Sent from my S30 using Tapatalk

06-20-2018, 07:36 AM	#9 (permalink)
thatguy420 Base Member Join Date: Apr 2018 Location: perth Posts: 7 Drives: 09 370z Rep Power: 7	Back to the door buzzer, someone asked if its possible to go into the bcm and turn off said warning! Anyone used a programme to enter a control module and modify preferences? Sent from my S30 using Tapatalk