DIY: Clutch Master Cylinder (CMC) replacement and rebuild

JARblue · 02-12-2017, 07:31 AM

Excellent write-up. Repped for that

Kzonts, I've done bleeding with two different RJM clutch pedals on my car and several on other vehicles with RJM clutch pedal (all rev2 or later). There is no need to mess with the pedal adjustments unless you have a rev1 pedal

Kzonts · 02-12-2017, 08:22 AM

Quote:

Originally Posted by JARblue

Excellent write-up. Repped for that

Kzonts, I've done bleeding with two different RJM clutch pedals on my car and several on other vehicles with RJM clutch pedal (all rev2 or later). There is no need to mess with the pedal adjustments unless you have a rev1 pedal

Thanks. That's what I was thinking as well. My clutch is nearly perfect at this time but I'll be replacing the CSC in a few weeks along with the CMC. But I'm taking it to SOHO Motorsports. :-)

TreeSemdyZee · 02-12-2017, 08:54 AM

Thanks for the write-up.

Question though. On the Zspeed bleeding technique, is the bleeder open during step 4?

fillerbunnie · 02-12-2017, 03:00 PM

Sorry, yes it is open slightly. I have updated the instructions

02-12-2017, 07:31 AM	#1 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 45 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684442	Excellent write-up. Repped for that Kzonts, I've done bleeding with two different RJM clutch pedals on my car and several on other vehicles with RJM clutch pedal (all rev2 or later). There is no need to mess with the pedal adjustments unless you have a rev1 pedal __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-12-2017, 08:54 AM	#3 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 62 Posts: 4,888 Drives: '09 370 & ‘14 Juke Rep Power: 27410	DIY: Clutch Master Cylinder (CMC) replacement and rebuild Thanks for the write-up. Question though. On the Zspeed bleeding technique, is the bleeder open during step 4? __________________ Borla S-Type \| Motordyne \| Z1 (lots) \| South Bend \| K&N \| Nismo/Nismo S-Tune \| Eibach \| Aerojacket \| Fujimara \| Spl \| ZSpeed Performance \| Kenwood-Infinity-Sound Ordnance \| Whiteline \| Ecutek \| Hotchkis \| Clazzio \| VQ Vortex \|Morimoto XB \|Dynosty Tune 329.64hp 265.73 ft/lb Last edited by TreeSemdyZee; 02-12-2017 at 09:27 AM.

02-12-2017, 03:00 PM	#4 (permalink)
fillerbunnie Base Member Join Date: Oct 2012 Location: AUstralia Posts: 31 Drives: '10 370Z Rep Power: 168	Sorry, yes it is open slightly. I have updated the instructions TreeSemdyZee likes this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] New clutch master cylinder	NeverBoneStck	Parts for sale (Private Classifieds)	2	12-07-2016 01:23 PM
Clutch Master Cylinder replacement	omgZ	DIY Section (Do-It-Yourself)	5	07-15-2016 10:59 PM
[WTB] Need a Clutch Master Cylinder	guzmanb66	Parts for sale (Private Classifieds)	11	03-13-2015 12:42 PM
Clutch master cylinder	Jimbo370	Engine & Drivetrain	14	11-19-2014 10:38 AM
Replacing the clutch line and clutch master cylinder	djrelic	DIY Section (Do-It-Yourself)	1	05-12-2014 01:46 PM