QuickJack Lift System

240se · 05-08-2019, 12:31 PM

A friend let me borrow his Quickjack when I changed my diff bushings. I used the pinch weld block on top of the short solid block. I didn't like having to stack them and kept an eye on the blocks but it was solid and stable the two days it was up.

My only complaint about the Quickjack is that they are heavy. You need to configure your garage so you don't move them around very much.

BettyZ · 05-08-2019, 12:35 PM

Quote:

Originally Posted by 240se

A friend let me borrow his Quickjack when I changed my diff bushings. I used the pinch weld block on top of the short solid block. I didn't like having to stack them and kept an eye on the blocks but it was solid and stable the two days it was up.

My only complaint about the Quickjack is that they are heavy. You need to configure your garage so you don't move them around very much.

Agreed, I was initially very uncomfortable stacking them. Ended up gorilla-taping the pinch weld blocks to the short blocks so I could be sure they were aligned correctly.

Sent from my SM-G955U using Tapatalk

CB1 · 05-08-2019, 01:23 PM

Quote:

Originally Posted by BettyZ

Agreed, I was initially very uncomfortable stacking them. Ended up gorilla-taping the pinch weld blocks to the short blocks so I could be sure they were aligned correctly.

Sent from my SM-G955U using Tapatalk

My set up is extremely stable. My Z is up on it all winter, for the last couple years. Just did a break job. Love this system!

Sent from my SM-G975U1 using Tapatalk

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KW HLS (Hydraulic Lift System)	CLOUD10	Brakes & Suspension	45	02-09-2017 10:18 AM
Too low to lift car	laricb	Brakes & Suspension	18	01-07-2012 03:12 PM
Garage Lift System	maxtodorov	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	9	06-05-2010 06:26 PM

05-08-2019, 12:31 PM	#1 (permalink)
240se Enthusiast Member Join Date: Nov 2013 Location: VA Posts: 260 Drives: Gunmetal 12' Rep Power: 13	A friend let me borrow his Quickjack when I changed my diff bushings. I used the pinch weld block on top of the short solid block. I didn't like having to stack them and kept an eye on the blocks but it was solid and stable the two days it was up. My only complaint about the Quickjack is that they are heavy. You need to configure your garage so you don't move them around very much.