US-made goodness !!

BGTV8 · 10-19-2014, 04:32 PM

Picked up my new shocks for the front of my historic race car - the old shocks were no longer working and needed to go into the junk-pile.

Check out these pieces of US-made goodness.

They weight less than one Kg ... lots of adjustment and the shock dyno trace shows a wide range of adjustment on bump and rebound.

The old car does not have room for external canisters and we are limited in period racing from using canister-based shocks anyway, but I am mightily impressed with this gear, Can't wait to get them in the car and the car back onto the track ...

These are a variation on the 7500 (they are a 7565 DA with speed dependent shaft internals from the canister version with a shim-stack customised for my cars weight and handling characteristics).

Rusty · 10-19-2014, 05:27 PM

See, we still make good stuff here.

1slow370 · 10-20-2014, 12:22 PM

Oh we make some of the best stuff it's just expensive I bet those were $1000 each from penske. JDM has NOTHING on US race goodies.

BGTV8 · 10-20-2014, 03:57 PM

Quote:

Originally Posted by 1slow370

Oh we make some of the best stuff it's just expensive I bet those were $1000 each from penske. JDM has NOTHING on US race goodies.

AUD 1960 the pair, including shim-stack install and shock dyno time to check (purchased via my suspension guru from the Australian Penske distributor in Adelaide). The Koni 2812 MKII was quite a bit more expensive and Ohlins were a next step up again.

You are correct, once you move beyond "fast-road", the JDM stuff simply does not cut the mustard.

What got me was the weight (or absence of it). These things are "good".

1slow370 · 10-20-2014, 06:27 PM

Quote:

Originally Posted by BGTV8

AUD 1960 the pair, including shim-stack install and shock dyno time to check (purchased via my suspension guru from the Australian Penske distributor in Adelaide). The Koni 2812 MKII was quite a bit more expensive and Ohlins were a next step up again.

You are correct, once you move beyond "fast-road", the JDM stuff simply does not cut the mustard.

What got me was the weight (or absence of it). These things are "good".

so yep almost 900US each imagine if you had ordered the 8300 series

kenchan · 10-20-2014, 08:13 PM

Quote:

Originally Posted by 1slow370

Oh we make some of the best stuff it's just expensive I bet those were $1000 each from penske. JDM has NOTHING on US race goodies.

thats because people are buying crap like tein's. lol

DEpointfive0 · 10-20-2014, 08:17 PM

Quote:

Originally Posted by kenchan

thats because people are buying crap like BCs. lol

Because I disagree...

Fixed

cv129 · 10-20-2014, 09:24 PM

I showed the Penske pic to a friend and he thought its a knock off of BC...

BGTV8 · 10-20-2014, 09:33 PM

Quote:

Originally Posted by cv129

I showed the Penske pic to a friend and he thought its a knock off of BC...

LoL .... knock-off is wrong way around I think, plus BC don;t attend race meetings and when did you last get a rebuild kit or alternative shim stack for BC

1slow370 · 10-21-2014, 03:00 AM

Quote:

Originally Posted by BGTV8

LoL .... knock-off is wrong way around I think, plus BC don;t attend race meetings and when did you last get a rebuild kit or alternative shim stack for BC

u actually can get those but the valving in a penske shock cant be compared to a bc, there is more technology in a base penske shock than even the best bc

Sent from my HTCONE using Tapatalk

kenchan · 10-21-2014, 10:07 AM

Quote:

Originally Posted by DEpointfive0

Because I disagree...

Fixed

problem with the US market is that majority of the users are cheap...thus end up with crappy products in general.
saw some mustang-gt over the weekend running narrow sedan wheels and some shitty v12 tires as an example.

kenchan · 10-21-2014, 10:10 AM

that said, i wish amazon would sell more SnapOn tools.... im all for nice tools

i hate crappy tools. makes me

DEpointfive0 · 10-21-2014, 10:50 AM

Quote:

Originally Posted by kenchan

that said, i wish amazon would sell more SnapOn tools.... im all for nice tools

i hate crappy tools. makes me

More a Craftsmam guy myself. I can swap tools 5 miles from home in case shít breaks

chops · 10-21-2014, 01:25 PM

Quote:

Originally Posted by DEpointfive0

More a Craftsmam guy myself. I can swap tools 5 miles from home in case shít breaks

ditto. although, last time a ratchet broke, they offered to replace it with a new one........made in china. got the manager to give me a different ratchet, made in usa after raising some ruckus

1slow370 · 10-21-2014, 05:13 PM

the new s&k stuff is great and you can get it grainger priced between crafstman and snapon and made in the usa. there is a snapon online order site now too can't remember it off the top of my head. If i ever need to get another set of tools I will be taking all my blue point/craftsman stuff home and getting a full set from s&k for work. for precision measurement I go Starret and mitutoyo (mitutoyo on the stuff i need to calibration cycle starret for permanent tools my starret 0-1 is 15yrs old and is still accurate to half a tenth).

10-19-2014, 05:27 PM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,920 Drives: 2011 Nismo GM 6M Rep Power: 2684436	See, we still make good stuff here. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

10-20-2014, 12:22 PM	#3 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	Oh we make some of the best stuff it's just expensive I bet those were $1000 each from penske. JDM has NOTHING on US race goodies. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

10-20-2014, 09:24 PM	#8 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,193 Drives: 09 Nismo, 16 Nismo Rep Power: 159827	I showed the Penske pic to a friend and he thought its a knock off of BC... __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

10-21-2014, 05:13 PM	#15 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	the new s&k stuff is great and you can get it grainger priced between crafstman and snapon and made in the usa. there is a snapon online order site now too can't remember it off the top of my head. If i ever need to get another set of tools I will be taking all my blue point/craftsman stuff home and getting a full set from s&k for work. for precision measurement I go Starret and mitutoyo (mitutoyo on the stuff i need to calibration cycle starret for permanent tools my starret 0-1 is 15yrs old and is still accurate to half a tenth). DEpointfive0 likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 10-21-2014 at 05:16 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
@@KW Variant 3 Coilovers!! German Made Goodness!@@	corner3garage	Suspension/Brakes	548	04-06-2017 06:46 AM
My pearl white sunshine of goodness on the way ...	k20z3	Other Vehicles	8	04-14-2012 11:27 PM
240z goodness	vash_241987	Other Vehicles	26	05-20-2010 02:51 PM
Pearly White goodness.	FloridaMike	Nissan 370Z Photos / Spyshots / Video / Media Gallery	11	05-17-2009 11:11 AM
More Goodness from Auto Salon!	370Ztune	370Ztune	2	01-21-2009 07:32 PM

10-21-2014, 10:10 AM	#12 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	that said, i wish amazon would sell more SnapOn tools.... im all for nice tools i hate crappy tools. makes me