Hows my alignment after Swift/SPC install?

synolimit · 09-06-2014, 08:37 PM

Are you ready to get another one soon? Never do alignment till the springs have settled.

Fronts ok but will get worse. Rears bad, will get worse. Start getting arms now for when you go back.

Zoren 370 · 09-06-2014, 08:51 PM

I agree you should have settled your springs before alignment.
Where do you have the SPC front, rear or both.

For the rear with SPC that can be dialed to -1.4 to -1.6 rear camber. If DD

I had mine at -2.4 rear camber due to driving the Z hard on cornering.
Sacrificed some camber wear on the tire. But that is expected from this numbers but stable with sharp curves.

Jaybo666 · 09-06-2014, 09:52 PM

here is my alignment sheet after install. No time for "spring settling". Car was nearly undrivable. If it needs a better alignment i will look into it. I drove straight to the alignment shop because the car was handling so bad

Zoren 370 · 09-06-2014, 10:20 PM

Yeah you definitely needed the alignment.
I just remembered I had mine done same day as they installed my rear SPC and toe bolts. Mine was worst.

Jaybo666 · 09-06-2014, 10:22 PM

come on in Kenchan, would like your opinion

09-06-2014, 08:37 PM	#1 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3391	Are you ready to get another one soon? Never do alignment till the springs have settled. Fronts ok but will get worse. Rears bad, will get worse. Start getting arms now for when you go back. Trips likes this. __________________ 13 370z-

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New alignment with swift springs	loiro370z	Brakes & Suspension	8	01-26-2014 08:55 PM
help with alignment numbers after swift spec r install...	kdrshocker	Brakes & Suspension	2	12-08-2013 01:04 PM
I just had a first alignment after installing swift springs.	khsysh	Brakes & Suspension	10	11-11-2013 12:55 AM
here are my alignment specs after swift spring install	area3z	Brakes & Suspension	5	03-28-2012 07:24 AM
Swift springs and my alignment	GaleForce	Brakes & Suspension	7	10-26-2011 07:03 PM

09-06-2014, 08:51 PM	#2 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913655	I agree you should have settled your springs before alignment. Where do you have the SPC front, rear or both. For the rear with SPC that can be dialed to -1.4 to -1.6 rear camber. If DD I had mine at -2.4 rear camber due to driving the Z hard on cornering. Sacrificed some camber wear on the tire. But that is expected from this numbers but stable with sharp curves.

09-06-2014, 10:20 PM	#4 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913655	Yeah you definitely needed the alignment. I just remembered I had mine done same day as they installed my rear SPC and toe bolts. Mine was worst.

09-06-2014, 10:22 PM	#5 (permalink)
Jaybo666 Base Member Join Date: Dec 2013 Location: Portland Posts: 64 Drives: 2011 370z Rep Power: 13	come on in Kenchan, would like your opinion