Z1 2-Piece Rear Rotors????

Super Werty · 06-01-2014, 05:57 PM

Quote:

Originally Posted by DEpointfive0

I wouldn't drive like that. Go adjust the boot adjustment thing. It's on the top of the drum, you can access it through the hole in the rotor, and flip it up

Not driving it at all. I have adjusted the boot thing about 5 times already. I have tried just about every click setting and it still makes noise. Seems to only be the drivers side

you can hear it with the rear jacked up and spinning the wheel by hand...something is dragging

something else I found interesting. adjusting the star all the way up or all the way down and it will stop the wheel from moving completely.

DEpointfive0 · 06-01-2014, 05:58 PM

Quote:

Originally Posted by Super Werty

Not driving it at all. I have adjusted the boot thing about 5 times already. I have tried just about every click setting and it still makes noise. Seems to only be the drivers side

you can hear it with the rear jacked up and spinning the wheel by hand...something is dragging

Ohhhhhhhhhh, ok.
Is there resistance?

Super Werty · 06-01-2014, 06:00 PM

Quote:

Originally Posted by DEpointfive0

Ohhhhhhhhhh, ok.
Is there resistance?

hard to tell by hand. but in reverse when I pull out of my garage I normally roll right out and now it wont move without giving it a little gas. its a very minor sound/resistance

Super Werty · 06-01-2014, 06:19 PM

adjusted it again and went for a trip around my hood and I dont feel any rolling resistance backing out, but the noise is still there. Just sounds like a pad touching the disk. You can only hear it with windows down at speeds below 10mph

Im hoping its not the shoes rubbing a hole through the hat from the inside out

slam1918 · 06-01-2014, 07:54 PM

check the thin backing plate on the front's. You may have bent it slightly and it's rubbing on the rotor.
Take the rear tires off and rotate the disk. Recheck the ebrake shoe & make sure all is in good order.

06-01-2014, 06:19 PM	#4 (permalink)
Super Werty Track Member Join Date: Jul 2013 Location: AZ Posts: 668 Drives: '13 Sport Rep Power: 15	adjusted it again and went for a trip around my hood and I dont feel any rolling resistance backing out, but the noise is still there. Just sounds like a pad touching the disk. You can only hear it with windows down at speeds below 10mph Im hoping its not the shoes rubbing a hole through the hat from the inside out __________________ The Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CZP 2-Piece Rotors - Stoptech Rotors - Hawk Pads - SS Lines Great Prices & Quality!!	Coz@Czp	Suspension/Brakes	29	07-07-2017 12:30 PM
Anybody running 2 piece rotors?	MigMac	Brakes & Suspension	8	02-18-2014 05:34 PM
project mu 2 piece rotors	keng714	Brakes & Suspension	11	09-23-2011 10:00 AM
Racing Brake Akebono 2 Piece Rotors - Front and Rear	Zat_Zuma	Brakes & Suspension	29	05-26-2011 08:45 AM
2 piece rear rotors?	jnaut	Brakes & Suspension	2	04-15-2011 07:44 AM

06-01-2014, 07:54 PM	#5 (permalink)
slam1918 Base Member Join Date: Feb 2012 Location: Tequesta, Fl Posts: 60 Drives: 10 370Z White A/T Rep Power: 15	check the thin backing plate on the front's. You may have bent it slightly and it's rubbing on the rotor. Take the rear tires off and rotate the disk. Recheck the ebrake shoe & make sure all is in good order.