Lowering Springs Comparisons

FLUJOKE · 12-05-2014, 07:03 PM

Mehhh then I better wait. Rather do it the right way. But don't wana spend $1,500 on fortune auto coilovers w springs. I know these 14's came with "euro tuned" shocks. Not sure what that all means but I don't want to ruin those.

FLUJOKE · 12-05-2014, 08:50 PM

Last question.... I hope. Will the swift springs require camber adjustments? If so can if just be adjusted or will I need to buy all these control arms and stuff?

Trips · 12-05-2014, 09:56 PM

I suggest buying both and getting an alignment

The comments on the coils being the cheaper way to go on lowering the Z is solely my opinion

And it wasn't meant to sway people from getting them.

FLUJOKE · 02-09-2015, 07:32 PM

I don't know man. I think Fortune Auto may be a lot more loyal and better quality in the long run.

Sent from my iPhone using Tapatalk

Driftomodachi · 02-10-2015, 01:39 PM

If you want to lower the car without coilovers consider Koni yellows with swift springs

Hotrodz · 02-10-2015, 09:06 PM

I have Fortune 500 with Swift spring and the ride and I love my ride and stance....and yes you will need all the supporting hardware. I have SPL front upper A arms, and rear camber arms with SPC toe bolts. The ride and performance much greater than just add lowering springs!

FLUJOKE · 02-11-2015, 04:55 PM

Yaaaa idk hotrodz. 300 for springs or 1,400 for coilovers plus all those adjustment arms. :/

Sent from my iPhone using Tapatalk

Read T · 02-11-2015, 09:48 PM

With a grinder and cutoff wheel you can have whatever drop you want!

Hotrodz · 02-11-2015, 10:30 PM

Quote:

Originally Posted by FLUJOKE

Yaaaa idk hotrodz. 300 for springs or 1,400 for coilovers plus all those adjustment arms. :/

Sent from my iPhone using Tapatalk

I didn't say it was cheap...but spending money on my suspension has increase my driving experience significantly!

RoyaltyB · 02-13-2015, 08:29 PM

I read somewhere, but can't seem to find it that there is a bit of a "break in" period with the Swift Spec-R springs. Basically asking if I will see the expected drop a little more over time or what I see is what I get. Have had them for 4 days now and it is lower, but not sure I'm seeing what the full drop should be, especially in the front.

Any feedback is appreciated.

DEpointfive0 · 02-13-2015, 09:15 PM

Quote:

Originally Posted by RoyaltyB

I read somewhere, but can't seem to find it that there is a bit of a "break in" period with the Swift Spec-R springs. Basically asking if I will see the expected drop a little more over time or what I see is what I get. Have had them for 4 days now and it is lower, but not sure I'm seeing what the full drop should be, especially in the front.

Any feedback is appreciated.

Give it a week-ish

RoyaltyB · 02-13-2015, 09:18 PM

Quote:

Originally Posted by DEpointfive0

Give it a week-ish

Thank you sir

And yes I got the SPL camber arms and SPC toe bolts, thank you for the suggestion.

DEpointfive0 · 02-13-2015, 09:21 PM

Quote:

Originally Posted by RoyaltyB

Thank you sir

And yes I got the SPL camber arms and SPC toe bolts, thank you for the suggestion.

Then try not to drive too much especially if you know your alignment isn't that great

RoyaltyB · 02-13-2015, 09:23 PM

Quote:

Originally Posted by DEpointfive0

Then try not to drive too much especially if you know your alignment isn't that great

I got the alignment when I had the springs and other components installed.

DEpointfive0 · 02-13-2015, 10:18 PM

Quote:

Originally Posted by RoyaltyB

I got the alignment when I had the springs and other components installed.

Hmmmmmm, once it settles you should get another. Tell them the car feels weird

12-05-2014, 07:03 PM	#46 (permalink)
FLUJOKE Track Member Join Date: Apr 2012 Location: earth Posts: 770 Drives: car Rep Power: 2067	Mehhh then I better wait. Rather do it the right way. But don't wana spend $1,500 on fortune auto coilovers w springs. I know these 14's came with "euro tuned" shocks. Not sure what that all means but I don't want to ruin those. Last edited by FLUJOKE; 12-05-2014 at 07:05 PM.

12-05-2014, 09:56 PM	#48 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	I suggest buying both and getting an alignment The comments on the coils being the cheaper way to go on lowering the Z is solely my opinion And it wasn't meant to sway people from getting them. FLUJOKE likes this. __________________ Last edited by Trips; 12-05-2014 at 09:59 PM.

02-10-2015, 01:39 PM	#50 (permalink)
Driftomodachi Enthusiast Member Join Date: Mar 2013 Location: Cerritos, CA Posts: 482 Drives: 2010 40th Rep Power: 13	If you want to lower the car without coilovers consider Koni yellows with swift springs Initial Z likes this. __________________ 2010 40th Anniversary ll GT-R start button ll GT-R map lenses ll Plastidipped fangs and rear valence ll OEM foglight & switch ll Motordyne E370 Cat back ll Motordyne ART Pipes ll Takeda aFe Attack CAI ll Sprint Booster ll Z1 34 row Setrab oil cooler ll Z1 Motorsports M-Spec Shift Knob

02-10-2015, 09:06 PM	#51 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	I have Fortune 500 with Swift spring and the ride and I love my ride and stance....and yes you will need all the supporting hardware. I have SPL front upper A arms, and rear camber arms with SPC toe bolts. The ride and performance much greater than just add lowering springs! enrique_370 and cigarclifford like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

02-11-2015, 09:48 PM	#53 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 17	With a grinder and cutoff wheel you can have whatever drop you want! sportsman2003 likes this. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

12-05-2014, 08:50 PM	#47 (permalink)
FLUJOKE Track Member Join Date: Apr 2012 Location: earth Posts: 770 Drives: car Rep Power: 2067	Last question.... I hope. Will the swift springs require camber adjustments? If so can if just be adjusted or will I need to buy all these control arms and stuff?

02-09-2015, 07:32 PM	#49 (permalink)
FLUJOKE Track Member Join Date: Apr 2012 Location: earth Posts: 770 Drives: car Rep Power: 2067	I don't know man. I think Fortune Auto may be a lot more loyal and better quality in the long run. Sent from my iPhone using Tapatalk

02-11-2015, 04:55 PM	#52 (permalink)
FLUJOKE Track Member Join Date: Apr 2012 Location: earth Posts: 770 Drives: car Rep Power: 2067	Yaaaa idk hotrodz. 300 for springs or 1,400 for coilovers plus all those adjustment arms. :/ Sent from my iPhone using Tapatalk

02-13-2015, 08:29 PM	#55 (permalink)
RoyaltyB Enthusiast Member Join Date: Oct 2013 Location: SoCal Posts: 325 Drives: '14 Nismo PW Rep Power: 27	I read somewhere, but can't seem to find it that there is a bit of a "break in" period with the Swift Spec-R springs. Basically asking if I will see the expected drop a little more over time or what I see is what I get. Have had them for 4 days now and it is lower, but not sure I'm seeing what the full drop should be, especially in the front. Any feedback is appreciated. __________________ Fast Intentions Stage 1 TT / F.I. 2.5 CF CBE / SpecialtyZ Max Street Clutch / F.I. 34 ROW OIL COOLER / VALENTINE ONE W/BLENDMOUNT / LAKERS LICENSE PLATE FRAME (GOTTA REP THE PURPLE AND GOLD )

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lowering springs	Z370Z011	Brakes & Suspension	37	02-18-2014 10:23 AM
ARK lowering springs	Bigd4mcc	Suspension/Brakes	0	02-13-2013 04:15 AM
wtb lowering springs	BRI888	Northern California Region	2	06-11-2011 02:18 AM
WTB: H&R Lowering Springs	KcL@AOI	Wanted	6	07-27-2010 10:35 PM
H&R Lowering Springs?	CBRich	Brakes & Suspension	8	03-01-2010 12:35 PM