Did i warp the rotors?

osbornsm · 06-08-2013, 07:22 PM

Okay, if anybody tells me to search i'm gonna smack you up side the head.

I know how to track and care for my vehicle...

Facts:

I did not in fact spray them with water after heating them up
I don't "believe" i have pad transfer as I have been driving around with the OEM pads for 3 weeks and the steering wheel still shakes like mad when applying the brakes
I have the forum record for the two tracks that i have been to so far, so I am in fact very hard on the brakes any REAL answers?
I used Carbotech XP8 pads front and rear for the track day and swapped back to the OEM pads on the SAME rotors.

And finally... anybody have the spec (thickness) for the OEM rotors and minimum thickness for turning / cutting them?

Thank you very kindly,
~ Like i stole it

SouthArk370Z · 06-08-2013, 07:43 PM

Any shop that does brake work can check for warpage. Specs are in the FSM.

ResIpsa · 06-09-2013, 08:52 AM

I personally don’t believe that rotors warp. But that discussion has already been played out a million times on this forum.

When you swapped back to your OEM pads did you at least sand the rotors? Did you properly bed the OEM pads after re-installation? The Carbo-Tech compound may not like the OEM compound.

I also track my car with XP-10’s and swap back the OEM pads for the street. And I get brake judder all the time if don’t remove the transfer layer and bed them.

However, I have fixed countless “warped” rotors with garnet (not aluminum oxide) sandpaper on a palm sander or drill sander. Garnet sandpaper can be ordered through 3M or at Harbor Freight.

olddudesrule · 06-09-2013, 03:19 PM

This^...Had this issue with another vehicle. Switched from track to street pads, and had shutter. Had to sand and rebed the pads. All good after that.

osbornsm · 06-10-2013, 11:32 AM

Thanks all... much appreciated !!

06-08-2013, 07:22 PM	#1 (permalink)
osbornsm A True Z Fanatic Join Date: Jun 2011 Location: WHAT Posts: 2,551 Drives: 2018 Camaro SS 1LE Rep Power: 423	Did i warp the rotors? Okay, if anybody tells me to search i'm gonna smack you up side the head. I know how to track and care for my vehicle... Facts: I did not in fact spray them with water after heating them up I don't "believe" i have pad transfer as I have been driving around with the OEM pads for 3 weeks and the steering wheel still shakes like mad when applying the brakes I have the forum record for the two tracks that i have been to so far, so I am in fact very hard on the brakes any REAL answers? I used Carbotech XP8 pads front and rear for the track day and swapped back to the OEM pads on the SAME rotors. And finally... anybody have the spec (thickness) for the OEM rotors and minimum thickness for turning / cutting them? Thank you very kindly, ~ Like i stole it __________________ 2018 Camaro SS 1LE (455hp) - 2011 Nissan 370z (333hp) - 2004 VW R32 (240hp) - 2000 Civic Si (160hp)

06-08-2013, 07:43 PM	#2 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	Any shop that does brake work can check for warpage. Specs are in the FSM. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

06-09-2013, 08:52 AM	#3 (permalink)
ResIpsa Track Member Join Date: Apr 2009 Location: Virginia Posts: 564 Drives: 09 RACING HEN Rep Power: 338	I personally don’t believe that rotors warp. But that discussion has already been played out a million times on this forum. When you swapped back to your OEM pads did you at least sand the rotors? Did you properly bed the OEM pads after re-installation? The Carbo-Tech compound may not like the OEM compound. I also track my car with XP-10’s and swap back the OEM pads for the street. And I get brake judder all the time if don’t remove the transfer layer and bed them. However, I have fixed countless “warped” rotors with garnet (not aluminum oxide) sandpaper on a palm sander or drill sander. Garnet sandpaper can be ordered through 3M or at Harbor Freight. osbornsm and olddudesrule like this. __________________ The Reed Law Firm; Michael Fasano VA Attorney and Counselor at Law: A Virginia Traffic, Criminal, and Family Lawyer.https://reedlawva.com/

06-10-2013, 11:32 AM	#5 (permalink)
osbornsm A True Z Fanatic Join Date: Jun 2011 Location: WHAT Posts: 2,551 Drives: 2018 Camaro SS 1LE Rep Power: 423	Thanks all... much appreciated !! __________________ 2018 Camaro SS 1LE (455hp) - 2011 Nissan 370z (333hp) - 2004 VW R32 (240hp) - 2000 Civic Si (160hp)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CZP 2-Piece Rotors - Stoptech Rotors - Hawk Pads - SS Lines Great Prices & Quality!!	Coz@Czp	Suspension/Brakes	29	07-07-2017 12:30 PM
Need Rotors, Which one is best?	370guy	Brakes & Suspension	31	10-12-2014 07:02 AM
EBC rotors.	User Name	Brakes & Suspension	13	07-23-2013 02:25 PM
Do I need new rotors?	DeEePiDDy	Brakes & Suspension	10	11-21-2011 11:14 AM
Rotors	Ty Weezy	Brakes & Suspension	5	06-19-2010 12:56 PM

06-09-2013, 03:19 PM	#4 (permalink)
olddudesrule Enthusiast Member Join Date: Apr 2013 Location: Gilbert, AZ Posts: 252 Drives: 2012 Nismo Rep Power: 12	This^...Had this issue with another vehicle. Switched from track to street pads, and had shutter. Had to sand and rebed the pads. All good after that.