Stock rays and with spacers

jaytwitch · 02-19-2013, 08:01 PM

Sorry I know this question has been asked countless times, I'm just in a predicament... I'm looking at swift springs with 20mm spacers all around, I should have no issues with rubbing right!

thanks guy

enkei2k · 02-19-2013, 08:14 PM

No issues...

There are people that do 20/25 and are fine.

axmea? · 02-19-2013, 10:41 PM

You can actually go lower than swifts plus 20mm's and not have issues.

SXZ34 · 02-26-2013, 01:45 PM

I'm on swifts sport rays and 20/25. No issues whatsoever. About to install 265/35, 305,30 re11's ill let ya know if those fit, I'm my expecting much issue, maybe drop the rear to 20 if anything. That will give you and idea how much clearance you'll have with stock tires

jaytwitch · 02-26-2013, 02:50 PM

Thanks guys.... Do u experience any vibrations at high speeds? I'm scared of getting 25mm in back I don't wanna have to deal with that sort of thing, rather have a clear state of mind with 20mm in back

jaytwitch · 02-26-2013, 02:51 PM

Can u post picture of ur car Alan on forum please

Tyler_370z · 02-26-2013, 03:34 PM

I just bought some as well

front and back. hope it looks better. I have heard that its better control for straight aways but for autocross it can suck is this true?

pfdaxe · 02-26-2013, 03:37 PM

I have 20/25 with stock Rays dropped on Teins. No issues or rubbing.

SXZ34 · 02-26-2013, 04:15 PM

Just check out my pic album "updates" that way you can see all kinda angles. No issues. After install and driving a while ou wanna check all your bolts. My fronts are stud replacement and rears are bolt on... If you are really concerned go with all stud replacements.

SXZ34 · 02-26-2013, 04:17 PM

I've never noticed any adverse handling effects... You probably would if you only did the rears or had big differences in spacing front to rear. 10/15, 15/20, 20/20, and 20/25 all should be just fine choices.

jaytwitch · 02-26-2013, 10:10 PM

Sounds good... Thanks guys, will do keep doing research.. Most likely getting stud replacement

Elcovorock · 02-27-2013, 02:12 AM

I'm my anticipating much problem, maybe fall the back to 20 if anything. That provides you with and concept how much approval you'll have with inventory wheels . . .

02-19-2013, 08:01 PM	#1 (permalink)
jaytwitch Base Member Join Date: Nov 2011 Location: Mission Posts: 60 Drives: 2011 370z Sport Rep Power: 13	Stock rays and with spacers Sorry I know this question has been asked countless times, I'm just in a predicament... I'm looking at swift springs with 20mm spacers all around, I should have no issues with rubbing right! thanks guy

02-19-2013, 08:14 PM	#2 (permalink)
enkei2k A True Z Fanatic Join Date: Apr 2011 Location: NYC Posts: 6,365 Drives: '12 G41 B/S M6 Rep Power: 3716	No issues... There are people that do 20/25 and are fine. __________________ ...need boost...

02-19-2013, 10:41 PM	#3 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53241	You can actually go lower than swifts plus 20mm's and not have issues. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

02-26-2013, 01:45 PM	#4 (permalink)
SXZ34 Base Member Join Date: Jan 2010 Location: Kennesaw Georgia Posts: 182 Drives: 12 PW 370Z Sport 6MT Rep Power: 15	I'm on swifts sport rays and 20/25. No issues whatsoever. About to install 265/35, 305,30 re11's ill let ya know if those fit, I'm my expecting much issue, maybe drop the rear to 20 if anything. That will give you and idea how much clearance you'll have with stock tires corner3garage likes this.

02-26-2013, 03:34 PM	#7 (permalink)
Tyler_370z Base Member Join Date: Jan 2013 Location: Cibolo Posts: 44 Drives: 10 Nissan 370z BL M6 Rep Power: 12	20 mm spacers I just bought some as well front and back. hope it looks better. I have heard that its better control for straight aways but for autocross it can suck is this true?

02-26-2013, 02:50 PM	#5 (permalink)
jaytwitch Base Member Join Date: Nov 2011 Location: Mission Posts: 60 Drives: 2011 370z Sport Rep Power: 13	Thanks guys.... Do u experience any vibrations at high speeds? I'm scared of getting 25mm in back I don't wanna have to deal with that sort of thing, rather have a clear state of mind with 20mm in back

02-26-2013, 02:51 PM	#6 (permalink)
jaytwitch Base Member Join Date: Nov 2011 Location: Mission Posts: 60 Drives: 2011 370z Sport Rep Power: 13	Can u post picture of ur car Alan on forum please

02-26-2013, 03:37 PM	#8 (permalink)
pfdaxe A True Z Fanatic Join Date: Aug 2012 Location: Phoenix, AZ Posts: 1,060 Drives: 09 Touring AT Sport Rep Power: 15	I have 20/25 with stock Rays dropped on Teins. No issues or rubbing. __________________ Build Thread: http://www.the370z.com/members-370z-...xes-build.html

02-26-2013, 04:15 PM	#9 (permalink)
SXZ34 Base Member Join Date: Jan 2010 Location: Kennesaw Georgia Posts: 182 Drives: 12 PW 370Z Sport 6MT Rep Power: 15	Just check out my pic album "updates" that way you can see all kinda angles. No issues. After install and driving a while ou wanna check all your bolts. My fronts are stud replacement and rears are bolt on... If you are really concerned go with all stud replacements.

02-26-2013, 04:17 PM	#10 (permalink)
SXZ34 Base Member Join Date: Jan 2010 Location: Kennesaw Georgia Posts: 182 Drives: 12 PW 370Z Sport 6MT Rep Power: 15	I've never noticed any adverse handling effects... You probably would if you only did the rears or had big differences in spacing front to rear. 10/15, 15/20, 20/20, and 20/25 all should be just fine choices.

02-26-2013, 10:10 PM	#11 (permalink)
jaytwitch Base Member Join Date: Nov 2011 Location: Mission Posts: 60 Drives: 2011 370z Sport Rep Power: 13	Sounds good... Thanks guys, will do keep doing research.. Most likely getting stud replacement

02-27-2013, 02:12 AM	#12 (permalink)
Elcovorock Base Member Join Date: Feb 2013 Location: USA Posts: 5 Drives: Nissan 350z Rep Power: 12	I'm my anticipating much problem, maybe fall the back to 20 if anything. That provides you with and concept how much approval you'll have with inventory wheels . . . __________________ surfers paradise car hire

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Spacers on 19" Rays/Stock Height	jdsuowner	Wheels & Tires	17	07-07-2016 04:46 AM
[FOR SALE] Stock Rays With Spacers (No Tires or TPMS)	Mr&Mrs	Parts for sale (Private Classifieds)	6	02-13-2013 07:58 PM
[FOR SALE] Stock rays and a full set of 25mm spacers	David Parra	Parts for sale (Private Classifieds)	13	05-02-2012 12:09 AM
Question regarding spacers/lugs on Stock Rays	ronjon19	Nissan 370Z General Discussions	0	03-01-2012 07:43 PM
Spacers on stock rays with 295's	wh1te370z	Wheels & Tires	46	04-22-2011 11:22 AM