Help !! Big alignment problem !!!

BudzZz · 03-26-2012, 06:53 PM

Quote:

Originally Posted by MJB

No, after market toe bolts like these- https://www.splparts.com/store/produ...hp?pid291.html

You have to enlarge the hole on the subframe where these would be installed... gives you way more toe adjustability.

And to answer your question... I don't know why he was able to get one side within specs and not the other.

And toe is adjusted from where the spring perch mounts to, not the camber arm

ok i guess i'll have to tell him to take off the toe bolt he put into the wrong hole and replace the stock toe bolt with the one that came with the SPC kit.

how much does the hole need to be enlarged ?

MJB · 03-26-2012, 07:00 PM

Quote:

Originally Posted by BudzZz

ok i guess i'll have to tell him to take off the toe bolt he put into the wrong hole and replace the stock toe bolt with the one that came with the SPC kit.

how much does the hole need to be enlarged ?

The stock toe bolt and stock camber bolt are essentially the same thing, so switching them back and forth isn't going to do anything... If he can not get toe back with in specs, is because there is no more adjustability to it. You would have to enlarge the hole the toe bolt mounts into and use a aftermarket bolt like the one pictured.

The one on the left is the aftermarket toe bolt, the one on the right is stock

BudzZz · 03-26-2012, 07:05 PM

Quote:

Originally Posted by MJB

The stock toe bolt and stock camber bolt are essentially the same thing, so switching them back and forth isn't going to do anything... If he can not get toe back with in specs, is because there is no more adjustability to it. You would have to enlarge the hole the toe bolt mounts into and use a aftermarket bolt like the one pictured.

The one on the left is the aftermarket toe bolt, the one on the right is stock

I think its the same one i got but was installed in the wrong hole so i'll start with that tomorrow.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alignment in MD	321go!	Mid-Atlantic Region	11	02-14-2012 01:35 AM
Help with alignment please.	Synack	Brakes & Suspension	29	08-01-2011 04:24 PM
Alignment Help!	Lazy	Brakes & Suspension	15	04-07-2011 09:10 PM
Alignment	Jquad	Brakes & Suspension	6	03-15-2011 12:32 AM
New Roadster, Spoiler problem, dealer problem	Hello	Nissan 370Z General Discussions	26	01-11-2010 05:22 PM