Sound Performance Differential Brace - Volunteers?

DIGItonium · 02-13-2012, 11:30 PM

Is anyone familiar with the differential brace for the 350Z? Sound and Performance does not have one for the 370Z, but would like to see if anyone local in that area would like to bring their car in to have them look at it and see if they can fabricate a solution for our cars.

Sound Performance – Blog 350z diff brace

The differential brace helps reduce or eliminate wheel hop due to excessive differential movement.

I'd love to add this brace along with polyurethane bushings (when available) to eliminate wheel hop.

Sound Performance
554 N. York Road
Bensenville IL, 60106
630-893-5002

modme · 02-14-2012, 08:11 AM

I had the 350z brace on my G37, I'm sure it'll fit the 370z too. The problem was the weakness of the material/design. After less than 10k miles, the welds on both brackets can loose and the brace became useless.

The Dimer · 02-14-2012, 08:27 AM

They're only about 40 minutes from me. Any idea how long they'd need the car or what would be involved in testing it?

Zat_Zuma · 02-14-2012, 09:01 AM

Quote:

Originally Posted by modme

I had the 350z brace on my G37, I'm sure it'll fit the 370z too. The problem was the weakness of the material/design. After less than 10k miles, the welds on both brackets can loose and the brace became useless.

I actually have a brace, for a 350Z, from Sound Performance and I guarantee that it won't fit. It's too big and needs to be redone. The spacing between the differential and main support beam (where the rear diff bushing is installed) on the 370Z is smaller and closer than the 350Z. There isn't a lot of room or beam material to install a brace on the 370Z. I would be hesitant to actually install one of those braces, as the main support beam could actually be weakened by installing a brace to the diff and develop stress cracks over time

I have a SPL bushing kit for the diff for a 370Z and a 350Z and there are differences. The rear bushing on a 370Z is smaller. Whereas the 2 front bushings on the diff are the same size.

Updates to follow this spring during the install.

One_Quick_Z · 02-14-2012, 09:26 AM

I have been there alot for dyno time and parts, so I will try to remember to talk to them this spring when I stop by their shop.

DAN

DIGItonium · 02-15-2012, 11:53 AM

modme, I read a few posts from people who said the brace welds and tubing were weak. Do you have stock bushings?

Cool. Yea, they've not had a chance to check out a 370Z. It'll be nice to know if it is feasible.

Other than that, I'm still waiting for a polyurethane bushing kit.

modme · 02-15-2012, 12:18 PM

I have stock bushings. The whole point of the brace for me was to provide support and distribute the load so that the stock bushing will not fail over time. But it seems like the brace cannot handle the load.

DIGItonium · 02-15-2012, 01:50 PM

Yea, which is why I'm waiting for some polyurethane bushings instead of solid ones as part of the solution.

modme · 02-15-2012, 02:09 PM

Here's a store that makes polyurathane bushings. They seem to only have 1 model and claim it fits 370z and G37 too. Might want to get in contact with them.

Nissan Solutions

DIGItonium · 02-15-2012, 03:47 PM

Sweet! I'll definitely contact them. I just need to get the front poly bushings. If the SPL front bushings are the same, then perhaps I can check up on the poly bushings!

It's a good start for now.

Zat_Zuma · 02-15-2012, 05:26 PM

Quote:

Originally Posted by modme

Here's a store that makes polyurathane bushings. They seem to only have 1 model and claim it fits 370z and G37 too. Might want to get in contact with them.

Nissan Solutions

Sorry, but I'm not impressed with what I see on the video.

This design will be sloppy and probably work itself loose and need to be retightened continiously

DIGItonium · 02-15-2012, 07:48 PM

Whiteline is still testing the differential bushings for our vehicles, so we will have to wait. Is there an extraction took for the rear bushing for our cars yet? I would hate to pay an arm and leg for the labor involved taking everything apart.

fuct · 02-17-2012, 09:52 AM

Quote:

Originally Posted by Zat_Zuma

Sorry, but I'm not impressed with what I see on the video.

This design will be sloppy and probably work itself loose and need to be retightened continiously

locktight and nylon nut? wheres the duct tape....

Lemers · 02-17-2012, 09:59 AM

Too bad you can't bring it out to El Paso.

02-13-2012, 11:30 PM	#1 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Sound Performance Differential Brace - Volunteers? Is anyone familiar with the differential brace for the 350Z? Sound and Performance does not have one for the 370Z, but would like to see if anyone local in that area would like to bring their car in to have them look at it and see if they can fabricate a solution for our cars. Sound Performance – Blog 350z diff brace The differential brace helps reduce or eliminate wheel hop due to excessive differential movement. I'd love to add this brace along with polyurethane bushings (when available) to eliminate wheel hop. Sound Performance 554 N. York Road Bensenville IL, 60106 630-893-5002 __________________

02-14-2012, 08:11 AM	#2 (permalink)
modme Enthusiast Member Join Date: Mar 2009 Location: NY Posts: 345 Drives: G37 Rep Power: 16	I had the 350z brace on my G37, I'm sure it'll fit the 370z too. The problem was the weakness of the material/design. After less than 10k miles, the welds on both brackets can loose and the brace became useless. __________________ GTM Twin Turbo Stage 2\|GTR Turbo/Engine Gauges\|KW V3 Coilovers\|HKS Exhaust\|Oil Cooler\| Vossen CV1

02-14-2012, 09:26 AM	#5 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 219	I have been there alot for dyno time and parts, so I will try to remember to talk to them this spring when I stop by their shop. DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

02-15-2012, 11:53 AM	#6 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	modme, I read a few posts from people who said the brace welds and tubing were weak. Do you have stock bushings? Cool. Yea, they've not had a chance to check out a 370Z. It'll be nice to know if it is feasible. Other than that, I'm still waiting for a polyurethane bushing kit. __________________

02-15-2012, 12:18 PM	#7 (permalink)
modme Enthusiast Member Join Date: Mar 2009 Location: NY Posts: 345 Drives: G37 Rep Power: 16	I have stock bushings. The whole point of the brace for me was to provide support and distribute the load so that the stock bushing will not fail over time. But it seems like the brace cannot handle the load. __________________ GTM Twin Turbo Stage 2\|GTR Turbo/Engine Gauges\|KW V3 Coilovers\|HKS Exhaust\|Oil Cooler\| Vossen CV1

02-14-2012, 08:27 AM	#3 (permalink)
The Dimer Track Member Join Date: Mar 2011 Location: Bolingbrook, IL Posts: 632 Drives: 2010 PW 370z Rep Power: 15	They're only about 40 minutes from me. Any idea how long they'd need the car or what would be involved in testing it?

02-15-2012, 01:50 PM	#8 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Yea, which is why I'm waiting for some polyurethane bushings instead of solid ones as part of the solution. __________________

02-15-2012, 02:09 PM	#9 (permalink)
modme Enthusiast Member Join Date: Mar 2009 Location: NY Posts: 345 Drives: G37 Rep Power: 16	Here's a store that makes polyurathane bushings. They seem to only have 1 model and claim it fits 370z and G37 too. Might want to get in contact with them. Nissan Solutions __________________ GTM Twin Turbo Stage 2\|GTR Turbo/Engine Gauges\|KW V3 Coilovers\|HKS Exhaust\|Oil Cooler\| Vossen CV1

02-15-2012, 03:47 PM	#10 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Sweet! I'll definitely contact them. I just need to get the front poly bushings. If the SPL front bushings are the same, then perhaps I can check up on the poly bushings! It's a good start for now. __________________

02-15-2012, 07:48 PM	#12 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Whiteline is still testing the differential bushings for our vehicles, so we will have to wait. Is there an extraction took for the rear bushing for our cars yet? I would hate to pay an arm and leg for the labor involved taking everything apart. __________________

02-17-2012, 09:59 AM	#14 (permalink)
Lemers A True Z Fanatic Join Date: Mar 2010 Location: Izmir, Turkey Posts: 15,371 Drives: 2012 Traverse LTZ Rep Power: 52	Too bad you can't bring it out to El Paso. __________________ 2010 Black Cherry Touring/Sport/Nav Now - 2012 Travese LTZ until I leave for Turkey

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: JADE performance rear lower brace install (gt spec, lazer_z)	lazer_Z	DIY Section (Do-It-Yourself)	5	12-16-2013 04:45 AM
Looking for volunteers and their z's	bigaudiofanat	Audio & Video	46	05-14-2012 08:04 AM
Our new 2 page spread in Performance Auto & Sound Magazine!	jav@vossen	The Lounge (Off Topic)	3	12-12-2011 02:05 PM
Berk Technology BMW 135i in Performance Auto & Sound Magazine!	BerkTech	Other Vehicles	0	05-24-2011 06:03 PM
high frequency sound/annoying as hell sound	Santent	Nissan 370Z General Discussions	4	12-22-2009 09:59 AM