Eibach Springs & Spacers - Review+Pics

Minicobra1 · 04-13-2009, 10:38 AM

Ok, here are the pics after I installed the Eibach Progressive springs and 15mm Ichiba spacers (rear only)

I think Eibach did a great job on the spring rates. The ride quality (comfort wise) is very similar to stock. I'd almost go as far as saying that it's actually a bit smoother on the small washboard stuff. The larger impacts are felt a little more, but it is not harsh at all. Handling has improved, it definitely feels more connected in the corners now. I'm sure the 15mm spacers contributed, but I installed the springs and the rear spacers at the same time, so I cant say how much of a difference the spacers made by themselves. I've travelled about 100 miles on these, many different roads, including the 91 Fwy (which is very choppy) and the car feels great. Took it to triple digits, with no vibration or harshness. The drop is subtle, about 1" front & Rear, there still is 3 fingers worth of clearance under the wind deflectors (ones in front of the wheels) so far srapping has not been an issue, but I always make it my intention to hit steep driveways at an angle.
Good job Eibach

I think my next suspension upgrade may be sway bars, but I'm pretty happy with the ride quality so for, so I don't want to make it harsh. This is a very good street set-up, I'm sure it would help on the track, but I think if you were wanting to track the car, you would want something a bit stiffer. I had the springs and the spacers installed at Amplified Motorsports, hit Lou up, he will PM you a nice price.

Rep points please

msl82 · 04-13-2009, 11:05 AM

Quote:

Originally Posted by Minicobra1

Ok, here are the pics after I installed the Eibach Progressive springs and 15mm Ichiba spacers (rear only)

I think Eibach did a great job on the spring rates. The ride quality (comfort wise) is very similar to stock. I'd almost go as far as saying that it's actually a bit smoother on the small washboard stuff. The larger impacts are felt a little more, but it is not harsh at all. Handling has improved, it definitely feels more connected in the corners now. I'm sure the 15mm spacers contributed, but I installed the springs and the rear spacers at the same time, so I cant say how much of a difference the spacers made by themselves. I've travelled about 100 miles on these, many different roads, including the 91 Fwy (which is very choppy) and the car feels great. Took it to triple digits, with no vibration or harshness. The drop is subtle, about 1" front & Rear, there still is 3 fingers worth of clearance under the wind deflectors (ones in front of the wheels) so far srapping has not been an issue, but I always make it my intention to hit steep driveways at an angle.
Good job Eibach

I think my next suspension upgrade may be sway bars, but I'm pretty happy with the ride quality so for, so I don't want to make it harsh. This is a very good street set-up, I'm sure it would help on the track, but I think if you were wanting to track the car, you would want something a bit stiffer. I had the springs and the spacers installed at Amplified Motorsports, hit Lou up, he will PM you a nice price.

Rep points please

Very nice man~!!

imag · 04-13-2009, 11:35 AM

Looks awesome. I love the stock wheels with the lowering and the offset. I think you've sold me.

batman_4 · 04-13-2009, 11:36 AM

oh that does look good!!!

any pics with more of an angle to see how the rear tire sits w/the fender?

EDIT: just saw your other thread but i noticed you still didn't have the springs installed...so any w/springs installed?

SOLISIMO · 04-13-2009, 11:49 AM

That looks great. Congrats on you new mod!

mcheddadi · 04-13-2009, 11:59 AM

I'm going to try to keep mine stock. the ride height is already pretty low and I want to drive mine in the winter (with dedicated winter tires of course).

But you don't need to worry about that since you're in Cali. Congrats on the mod!

dlmartin81 · 04-13-2009, 01:15 PM

WOW!! That looks GREAT man!

However, it seems like you might need to adjust the cambering in the rear.

370z4Steve · 04-13-2009, 01:26 PM

all that is left is doing the fronts..you going for 10mm or 15mm?

sensi09 · 04-13-2009, 01:57 PM

That looks good. Will you be getting dampers in the future?

JonnieN · 04-13-2009, 07:53 PM

Do you think that you going to need cambers with the 1 inch drop?

ArtVandaleigh · 04-13-2009, 07:54 PM

Very nice. Do you think you will need an alignment after this drop?

Minicobra1 · 04-13-2009, 07:59 PM

Quote:

Originally Posted by batman_4

oh that does look good!!!

any pics with more of an angle to see how the rear tire sits w/the fender?

EDIT: just saw your other thread but i noticed you still didn't have the springs installed...so any w/springs installed?

I'll post another one up tonight

Minicobra1 · 04-13-2009, 08:03 PM

Quote:

Originally Posted by 370z4Steve

all that is left is doing the fronts..you going for 10mm or 15mm?

I'm going with the 15mm, I think it makes sense to keep the ratio the same as they were stock. They are tucked in there pretty good, so the 15mm will look nice.

Minicobra1 · 04-13-2009, 08:05 PM

Quote:

Originally Posted by JonnieN

Do you think that you going to need cambers with the 1 inch drop?

Not sure yet, but I plan on looking into that after I get the front spacers installed.

Minicobra1 · 04-13-2009, 08:07 PM

Quote:

Originally Posted by ArtVandaleigh

Very nice. Do you think you will need an alignment after this drop?

The car feels exactly the same (steering wise) if anything, I think it has improved. I will probably have a shop take a look at it, once I install the front spacers.

04-13-2009, 11:36 AM	#4 (permalink)
batman_4 A True Z Fanatic Join Date: Dec 2008 Location: McAllen Tx. Posts: 1,038 Drives: '09 PW 370Z Rep Power: 367	oh that does look good!!! any pics with more of an angle to see how the rear tire sits w/the fender? EDIT: just saw your other thread but i noticed you still didn't have the springs installed...so any w/springs installed? __________________ '09 6spd. Touring: Eibach / SPC / Motordyne / Berk / Z1 / Oneighty / Mines / SSR / Stillen / CFE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eibach Springs - In Stock & Shipping!	Josh@STILLEN	Brakes & Suspension	23	05-09-2009 04:19 PM
Update pics of Eibach lowering springs	DJcuetip	Brakes & Suspension	38	04-24-2009 11:59 PM
Intro Pricing - STILLEN Sway Bars & Eibach Springs!	Josh@STILLEN	Brakes & Suspension	12	04-14-2009 07:29 PM

04-13-2009, 11:35 AM	#3 (permalink)
imag Enthusiast Member Join Date: Mar 2009 Location: Oakland, CA Posts: 446 Drives: up the wall Rep Power: 16	Looks awesome. I love the stock wheels with the lowering and the offset. I think you've sold me.

04-13-2009, 11:49 AM	#5 (permalink)
SOLISIMO Track Member Join Date: Apr 2009 Location: Florida Posts: 510 Drives: TOP SECRET G37S Rep Power: 17	That looks great. Congrats on you new mod!

04-13-2009, 11:59 AM	#6 (permalink)
mcheddadi Base Member Join Date: Apr 2009 Location: canada Posts: 31 Drives: 08 altima coupe 3.5 Rep Power: 16	I'm going to try to keep mine stock. the ride height is already pretty low and I want to drive mine in the winter (with dedicated winter tires of course). But you don't need to worry about that since you're in Cali. Congrats on the mod!

04-13-2009, 01:15 PM	#7 (permalink)
dlmartin81 Track Member Join Date: Dec 2008 Location: Chalfont, PA Age: 42 Posts: 923 Drives: 09 370Z Rep Power: 607	WOW!! That looks GREAT man! However, it seems like you might need to adjust the cambering in the rear.

04-13-2009, 01:26 PM	#8 (permalink)
370z4Steve Base Member Join Date: Jan 2009 Location: west Posts: 231 Drives: 370z Rep Power: 672	all that is left is doing the fronts..you going for 10mm or 15mm?

04-13-2009, 01:57 PM	#9 (permalink)
sensi09 Enthusiast Member Join Date: Dec 2008 Location: so cal Posts: 449 Drives: _ Rep Power: 16	That looks good. Will you be getting dampers in the future?

04-13-2009, 07:53 PM	#10 (permalink)
JonnieN Base Member Join Date: Apr 2009 Location: Upstate, NY Posts: 153 Drives: 370z PW 6MT Rep Power: 16	Do you think that you going to need cambers with the 1 inch drop?

04-13-2009, 07:54 PM	#11 (permalink)
ArtVandaleigh Base Member Join Date: Jan 2009 Location: NE Ohio Posts: 227 Drives: 09 PW 370Z Rep Power: 675	Very nice. Do you think you will need an alignment after this drop?