H&R or Swift Springs?

Red__Zed · 04-02-2011, 08:37 PM

I would do (and am going to do) Swifts.

esfourteen · 04-02-2011, 10:11 PM

Quote:

Originally Posted by Red__Zed

I would do (and am going to do) Swifts.

you wont regret it, I'm still amazed at how much better the car feels over stock. with a nice set of sways there is very little body roll left and its very comfortable (for a sports car).

EckoTx · 07-26-2011, 02:04 PM

Quote:

Originally Posted by Viera

I have the Fast Intentions exhaust and have been contemplating on the H&R's for a while now. I prefer the stance of the H&R springs compared to everything else, but I just don't know if I will be scraping EVERYTIME I drive. Does anyone have pics of their FI exhaust + H&R/Swift springs in the rear? I'm pretty much dead set on the H&R's, but I just don't want to regret getting those after putting them on and scraping every time I hit a bump on the road or something. Thanks.

Jonathan

I have the same issue, i really don't care about all these performance way better crap with swifts, i want the drop look so H&R is what I'am going for but I'm also getting the Fast Intentions exhaust. Did you find out what you were looking for? I'm guessing it wont be a problem because the FI is low in the rear and the Swifts or H&R both lower the same thing in the rear, the difference is the front.

EckoTx · 07-26-2011, 02:16 PM

Quote:

Originally Posted by JJ-NISMO

What are people generally paying for install on these? I was just quoted 500-600 locally in So Cal

I just got a quote of 195 plus 75 to for the alignment.

KamiSpeed · 07-26-2011, 04:26 PM

Quote:

Originally Posted by esfourteen

you wont regret it, I'm still amazed at how much better the car feels over stock. with a nice set of sways there is very little body roll left and its very comfortable (for a sports car).

if you're interested in sway bars I got swaybars from whiteline in stock

Torgant · 09-21-2011, 01:03 PM

My z is on H&Rs. I can say, it`s definitely not good for track use.
Did anybody try to track their cars on swift`s?

WxMan · 10-24-2011, 07:55 AM

I would like to drop my stock coupe but I only have the touring package. Can sport springs like H&R be put on a base model without the sport package?

Red__Zed · 10-24-2011, 08:02 AM

Quote:

Originally Posted by WxMan

I would like to drop my stock coupe but I only have the touring package. Can sport springs like H&R be put on a base model without the sport package?

Yes, springs are identical across the non-nismo models.

I ran swifts on my car with no sport package.

JollyGoodChap · 10-24-2011, 02:00 PM

go with swifts!

SuperZeto · 10-27-2011, 07:11 PM

I can see that the H&R lowers the front pretty good but leaves a little bit more of a gap on the rear... I'm trying to decide what to get.. But now I really like the Tanabe springs... Hmmmm - hard choice.. I wish someone would take a rear shot of each car with the different springs so I could see how it looks from the back. Any takers?

anthonyy · 10-27-2011, 07:29 PM

^^ gotta keep looking man. I stalk this forum like a mofo and have seen applications of each (just don't know specifically where). Check out members galleries, a lot of the time they will tell you what type of springs/coils they are running.

lol sometimes I feel like "we" regular members are like second class citizens in this community

Red__Zed · 10-27-2011, 07:30 PM

Quote:

Originally Posted by SuperZeto

I can see that the H&R lowers the front pretty good but leaves a little bit more of a gap on the rear... I'm trying to decide what to get.. But now I really like the Tanabe springs... Hmmmm - hard choice.. I wish someone would take a rear shot of each car with the different springs so I could see how it looks from the back. Any takers?

closest I have to a rear shot. On swifts.

SuperZeto · 10-27-2011, 07:31 PM

Wow yeah I really like the swifts... Those look nice.

BudzZz · 03-08-2012, 12:11 PM

I just received my H&R springs with the SPC rear camber kit but still waiting for my Fast Intentions Catback exhaust to arrive and i'll post the pics of all these parts installed soon enough for all those who were wondering about this setp up.

I myself was looking all over the place to find pics of all these parts installed to see the stance of the beast !

Viera · 03-08-2012, 01:12 PM

Quote:

Originally Posted by EckoTx

I have the same issue, i really don't care about all these performance way better crap with swifts, i want the drop look so H&R is what I'am going for but I'm also getting the Fast Intentions exhaust. Did you find out what you were looking for? I'm guessing it wont be a problem because the FI is low in the rear and the Swifts or H&R both lower the same thing in the rear, the difference is the front.

Sorry for such a late reply! I've had my H&R's on for a few months now and I still don't think its dropped enough in the rear. Coilovers are def. the best way.

10-24-2011, 07:55 AM	#112 (permalink)
WxMan Base Member Join Date: Sep 2010 Location: Cordova, TN Posts: 75 Drives: 09 370Z White M6 Tou Rep Power: 14	I would like to drop my stock coupe but I only have the touring package. Can sport springs like H&R be put on a base model without the sport package? __________________ Dennis Stillen 2nd Gen CAI/Z1 HFMC/FI Catback Exhaust w/18" resonators/Akebono Brake Upgrade/TSW Jarama 18" Wheels/15mm rear spacers/Stillen Sway Bars/H&R Sport Springs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift springs review!!!!!	CFZ	Brakes & Suspension	2166	09-10-2020 01:58 AM
RS-R springs?	GTRFAN	Brakes & Suspension	74	03-08-2012 08:41 AM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
SWIFT Springs in Production	wishihadnav	Brakes & Suspension	200	02-01-2011 02:34 PM
Eibach springs vs H&R springs	xbigb4ller69z	Brakes & Suspension	8	07-27-2010 08:02 AM

04-02-2011, 08:37 PM	#106 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	I would do (and am going to do) Swifts.

09-21-2011, 01:03 PM	#111 (permalink)
Torgant Base Member Join Date: Jun 2010 Location: Belarus Minsk Posts: 35 Drives: 09 370z m6 sp Rep Power: 14	My z is on H&Rs. I can say, it`s definitely not good for track use. Did anybody try to track their cars on swift`s?

10-24-2011, 02:00 PM	#114 (permalink)
JollyGoodChap Enthusiast Member Join Date: Aug 2010 Location: Lust Angeles Posts: 328 Drives: Z34 Rep Power: 14	go with swifts!

10-27-2011, 07:11 PM	#115 (permalink)
SuperZeto Base Member Join Date: Aug 2011 Location: Redmond, WA Posts: 92 Drives: '78 280Z, '09 370Z Rep Power: 13	I can see that the H&R lowers the front pretty good but leaves a little bit more of a gap on the rear... I'm trying to decide what to get.. But now I really like the Tanabe springs... Hmmmm - hard choice.. I wish someone would take a rear shot of each car with the different springs so I could see how it looks from the back. Any takers?

10-27-2011, 07:29 PM	#116 (permalink)
anthonyy A True Z Fanatic Join Date: Apr 2011 Location: Los Gatos, CA Posts: 1,027 Drives: Lexus CT Rep Power: 16	^^ gotta keep looking man. I stalk this forum like a mofo and have seen applications of each (just don't know specifically where). Check out members galleries, a lot of the time they will tell you what type of springs/coils they are running. lol sometimes I feel like "we" regular members are like second class citizens in this community

10-27-2011, 07:31 PM	#118 (permalink)
SuperZeto Base Member Join Date: Aug 2011 Location: Redmond, WA Posts: 92 Drives: '78 280Z, '09 370Z Rep Power: 13	Wow yeah I really like the swifts... Those look nice.

03-08-2012, 12:11 PM	#119 (permalink)
BudzZz Base Member Join Date: Feb 2012 Location: Montreal Canada Posts: 56 Drives: 2012 Subaru Sti Rep Power: 13	I just received my H&R springs with the SPC rear camber kit but still waiting for my Fast Intentions Catback exhaust to arrive and i'll post the pics of all these parts installed soon enough for all those who were wondering about this setp up. I myself was looking all over the place to find pics of all these parts installed to see the stance of the beast !