Slammed 370's Pics please!! :)

Xplicit97 · 07-06-2012, 02:51 AM

ImageUploadedByTapatalk1341561073.350057.jpg

ImageUploadedByTapatalk1341561116.129056.jpg

---
I am here: http://tapatalk.com/map.php?mnyedp

sfearl1 · 07-06-2012, 02:59 AM

^^

dirTy_shoeZ · 07-11-2012, 09:49 PM

Quote:

Originally Posted by blackonorange

I have dirty shoez old rims now te he

Pics??

Cuban Z · 07-12-2012, 12:13 AM

Quote:

Originally Posted by Liquid_G

On Stance GR+ coils.. Can go even lower. (which I plan to do next season)

Wow...nicely done.

Sent using Tapatalk 2

RC24 · 07-13-2012, 02:19 PM

Question for those who have lowered their Z. I am coming up on a month of ownership with my car, and the first thing I changed out was the wheels/tires.

I went with 19x9.5 with 25 offset in the front, and 19x10.5 with 12 offset in the rear. I played it safe with the tire sizes and just duplicated what the Nizmo Z runs with 245/40 front and 285/35 rears.

The wheel gap is killing me, so lowering the car is a must. When I purchased the wheels, I was expecting them to be pretty flush with the fenders, but they actually stick out about 1cm at the top of the wheel.

I'm looking to lower it as much as I can without having to run much more negative camber than stock. I was going to go with coilovers, but am now just thinking about using Swift springs and lowering it about an inch.

Is there anyone with similar size wheels that could post pictures of their setup so I can get an idea of what to expect?

memorylasts · 07-13-2012, 02:35 PM

Quote:

Originally Posted by RC24

Question for those who have lowered their Z. I am coming up on a month of ownership with my car, and the first thing I changed out was the wheels/tires.

I went with 19x9.5 with 25 offset in the front, and 19x10.5 with 12 offset in the rear. I played it safe with the tire sizes and just duplicated what the Nizmo Z runs with 245/40 front and 285/35 rears.

The wheel gap is killing me, so lowering the car is a must. When I purchased the wheels, I was expecting them to be pretty flush with the fenders, but they actually stick out about 1cm at the top of the wheel.

I'm looking to lower it as much as I can without having to run much more negative camber than stock. I was going to go with coilovers, but am now just thinking about using Swift springs and lowering it about an inch.

Is there anyone with similar size wheels that could post pictures of their setup so I can get an idea of what to expect?

I am running the same widths as you just a more aggressive offset, a +17 front and +8 rear on coil-overs you will be able to maintain a OEM camber angle if you get the camber arms and what not. Also if you look at anyone with a set of TE37's they will have a +22? front and +12 rear.

Here is a few pictures

RC24 · 07-13-2012, 03:04 PM

Not having any issues with rubbing running stock camber with those offsets?

doliva · 07-14-2012, 12:34 PM

Quote:

Originally Posted by One_Quick_Z

I really need to see your car again I would like to go with a similar set up on suspension

DAN

Love the set up, what's the cost for the kit?

Liquid_G · 07-17-2012, 07:52 PM

Quote:

Originally Posted by Cuban Z

Wow...nicely done.

Sent using Tapatalk 2

Thanks.. super old pic.. I kinda miss those wheels though..

One_Quick_Z · 07-17-2012, 10:47 PM

Quote:

Originally Posted by doliva

Love the set up, what's the cost for the kit?

He had Stance GR+ coils in that picture, which is what I am currently running and love them along with SPC front and rear camber arms. I picked up mine from THMotorsports which is based out of Chicago and where great so contact them and they will get you the best deal. Tell them I refered you if you have any issue let me know.

DAN

whoady4shoady · 07-18-2012, 11:29 PM

Quote:

Originally Posted by Srenity

I will never ever get that type of setup. With an engineering background it just blows me away that somebody would buy wide wheels and proceed to throw skinny tires on them with so much negative chamber that half of the tire is literally off the ground. The entire point of wide wheels is to fit wide rubber. The entire point of wide rubber is to increase grip. How does wide rubber increase grip? By increasing the size of the contact patch. This setup does the exact opposite of this.

I know it is just for looks but it looks ridiculous too.

memorylasts · 07-19-2012, 01:03 AM

Quote:

Originally Posted by RC24

Not having any issues with rubbing running stock camber with those offsets?

No issues rubbing. 265 front 285 rear

KaienZ34 · 07-19-2012, 08:11 AM

^^ Nice, what's the offsets?

memorylasts · 07-19-2012, 10:10 AM

Quote:

Originally Posted by KaienZ34

^^ Nice, what's the offsets?

9.5 +17 f 10.5 +08 rear(I could push out a couple more mm not enough to warrant the work though)

Sent from my Galaxy Nexus using Tapatalk 2

NOFATCHX · 07-24-2012, 08:15 PM

07-06-2012, 02:51 AM	#301 (permalink)
Xplicit97 Track Member Join Date: May 2011 Location: Bremerton, WA Age: 45 Posts: 875 Drives: 2011 Nismo 370Z Rep Power: 300	ImageUploadedByTapatalk1341561073.350057.jpg ImageUploadedByTapatalk1341561116.129056.jpg --- I am here: http://tapatalk.com/map.php?mnyedp __________________ [B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

07-06-2012, 02:59 AM	#302 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 17	^^ __________________ Scott

07-19-2012, 08:11 AM	#313 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	^^ Nice, what's the offsets? __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

07-24-2012, 08:15 PM	#315 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	__________________ 20x10.5 Vossen CV3s, Falken, Stillen, AAM, Topspeed, BC Racing, ICHIBA, 180 CUSTOM, Satin Pearl White and Carbon wrapped Instagram: 10acious_Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
best exhaust for slammed cars	Liquid_G	Intake/Exhaust	22	09-16-2013 03:51 PM
2011 Mercedes E-class slammed on Vossen VVS-086	jav@vossen	Other Vehicles	4	06-27-2010 11:11 AM
:::Mercedes CLS55 slammed on the new Vossen VVS-CV1 (DEEP CONCAVE)	jav@vossen	Other Vehicles	7	05-06-2010 11:58 PM
>>White Mercedes CLS55 slammed on Vossen VVS086<<	jav@vossen	Other Vehicles	3	05-03-2010 10:10 AM
Are You Seeing 370's Out There? I'm not...	OldGuy	Nissan 370Z General Discussions	64	01-03-2010 11:34 PM

07-13-2012, 02:19 PM	#305 (permalink)
RC24 Base Member Join Date: Jun 2012 Location: Irvine, CA Posts: 35 Drives: '12 370Z PW M6 Rep Power: 12	Question for those who have lowered their Z. I am coming up on a month of ownership with my car, and the first thing I changed out was the wheels/tires. I went with 19x9.5 with 25 offset in the front, and 19x10.5 with 12 offset in the rear. I played it safe with the tire sizes and just duplicated what the Nizmo Z runs with 245/40 front and 285/35 rears. The wheel gap is killing me, so lowering the car is a must. When I purchased the wheels, I was expecting them to be pretty flush with the fenders, but they actually stick out about 1cm at the top of the wheel. I'm looking to lower it as much as I can without having to run much more negative camber than stock. I was going to go with coilovers, but am now just thinking about using Swift springs and lowering it about an inch. Is there anyone with similar size wheels that could post pictures of their setup so I can get an idea of what to expect?

07-13-2012, 03:04 PM	#307 (permalink)
RC24 Base Member Join Date: Jun 2012 Location: Irvine, CA Posts: 35 Drives: '12 370Z PW M6 Rep Power: 12	Not having any issues with rubbing running stock camber with those offsets?