Swift springs review!!!!!

synolimit

The reason not to get them is an eccentric bolt can slip and lose all alignment on the track. You're better off to get or make your own eccentric lockout kit like I did and get traction arms to adjust toe and camber arms for camber.

__________________
13 370z-

scionide

Is there a certain amount of toe to not go over when adjusting toe via the traction arms, since traction arms also effect bumpsteer. I've read that ideally you want to adjust the toe via the midlink but..to do so without eccentric bolts then you have to either go a true coilover setup or buy SPL's 700-800 mid links.

If any of the track gurus could chime in on this too

synolimit

That I don't know. Guess I'll have to see when I align.

I just looked at some alignment sheets, I don't even see bumpsteer on there. Is it just a feeling when on the track? Every bump changes the severity of steer depending how much you effect it with certain parts, ride height etc?

__________________
13 370z-

scionide

Yea bumpsteer is how much the compression causes the wheels to toe while cornering, not much of an issue during street driving. I found an old thread with other members discussing it, it causes the rather unsettling "floating" feeling and the rear end feels unstable. I felt it at Big Willow and it was pretty sketchy, I'm fairly sure in my case it's mostly because of my alignment not being optimal.

synolimit

I feel it now stock. Very scary. I figure change all bushings to solid from spl, plus arms etc, I have a lockout out kit for the toe bolts and camber bolt and I shouldn't have any bumpsteer.

__________________
13 370z-