10-01-2010, 07:21 PM
|
#3 (permalink)
|
|
The370Z.com Sponsor
Join Date: Dec 2008
Location: Costa Mesa, CA
Posts: 1,197
Drives: 2004 G35 Coupe 6MT
Rep Power: 535
|
Quote:
Originally Posted by gozfast
Can I run a staggered setting on the Stillen adjustable rear swaybar? What I mean is one end link in the front hole and the other end link in the rear hole. The rear bar says it's adjustable for 37-70% stiffer than stock. So the staggered setting should give me a 54% stiffer setting, right? Is there any reason this would be unsafe or inadvisable to do? The car still pushes the front end with the front and rear Stillen sways installed with the back on the softer setting, but I sure don't want it too stiff or tail happy either. Would a better solution be to just put the stock front bar back on?
|
Yes, absolutely. The 2 holes create 3-way adjustability. The bar is being stressed torsionally, so staggering the holes is a setting in between.
|
|
|
Similar Threads
Threaded Mode
