Alliance BBK (First Powder-Coated Red)

JB-370z · 04-08-2010, 02:07 PM

Quote:

Originally Posted by ATL_Red_G35

OP, here's my question.

Are you going to run the SSR with the BBK? If so, I highly doubt that it'd fit, diameterwise.

Reason being is because the SSR has step lips, thus the inner diameter is going to be smaller than regular 19". These BBK requires 19" wheels to clear, so I'm afraid that you may run into the problem.

I too have the Rotora 15" BBK and when I chose the wheels even with 20" step lip, it won't clear the diameter.

I really hope that you prove me wrong, that way I can get a set of 20" step lip wheels for the G35

Below is a picture of a Z with 370mm Endless rotors which is 14.56656367 inches the rotor I went with is 380mm which is 14.96025458 inches so yes there is no reason why they wont fit 20". I have the same identical specs as the Z in this picture. 1/4 of an inch difference is all I am worried about but it might be enough to not fit but I will be the lab rat on this one. Plus Mike said we could switch out for a 14" rotor as soon as the bracketts are made. Mikes got my back either way so we will find out soon if 1/4 inch is going to kill me or not.

Invi5 · 09-04-2011, 05:19 PM

What company makes the front and rear bumper and skirt adds?

KaienZ34 · 09-04-2011, 07:00 PM

Quote:

Originally Posted by Invi5

What company makes the front and rear bumper and skirt adds?

SunLine Racing originally made this lip kit. (front,rear,sides) They have serval other companies that make very nice replicas.

Invi5 · 09-04-2011, 11:34 PM

thanks looks really nice.

XwChriswX · 09-04-2011, 11:36 PM

It does look pretty good, any idea who did the Wing Kaien??

KaienZ34 · 09-05-2011, 01:15 PM

Quote:

Originally Posted by XwChriswX

It does look pretty good, any idea who did the Wing Kaien??

Now that i'm trying to remember who, i just can't think of the name....DAMN!! user647_pic11049_1266643045.gif

09-04-2011, 05:19 PM	#2 (permalink)
Invi5 Base Member Join Date: Sep 2011 Location: Morro Bay, CA Posts: 2 Drives: 370z 09 Rep Power: 15	What company makes the front and rear bumper and skirt adds? Last edited by Invi5; 09-04-2011 at 05:21 PM.

09-04-2011, 11:36 PM	#5 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 454	It does look pretty good, any idea who did the Wing Kaien?? __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo factory rims powder coated GR-02	Minicobra1	Wheels & Tires	61	09-05-2010 11:36 PM
FS: Alliance BBK 8/6 piston 15" rotors	SOLISIMO	Parts for sale (Private Classifieds)	33	03-18-2010 09:51 PM
Powder coating in Northern VA	m4a1mustang	Mid-Atlantic Region	17	12-26-2009 09:29 PM
powdered coated base wheels on MB?	OC 370ZEEE	Member's 370Z Gallery	10	11-05-2009 04:44 PM
Coated or Non-coated wheels?	YamahaR6	Wheels & Tires	2	04-14-2009 08:46 AM

09-04-2011, 11:34 PM	#4 (permalink)
Invi5 Base Member Join Date: Sep 2011 Location: Morro Bay, CA Posts: 2 Drives: 370z 09 Rep Power: 15	thanks looks really nice.