Spl camber arms and tow bolt question.

svt to 370z · 03-04-2019, 04:33 PM

so its necessary so the tires don't wear unevenly in the inner tread

Rusty · 03-04-2019, 04:57 PM

Quote:

Originally Posted by svt to 370z

so its necessary so the tires don't wear unevenly in the inner tread

Too much neg camber will cause the tires to wear on the inside.

Jetsimple · 03-08-2019, 10:33 AM

The toe bolts are pretty much a necessity. When I put on my KWV3 coilovers and went for a test drive, I couldn’t get over 25 mph without the car going all over the place. I set the toe out on the rear as far out as stock toe bolts would allow and it was better, but still not enough.

Jetsimple · 03-08-2019, 10:37 AM

There’s this exact setup for sale in the classified section right now, except they have SPC camber arms instead of SPL.

k67p67 · 03-08-2019, 08:35 PM

Quote:

Originally Posted by Jetsimple

There’s this exact setup for sale in the classified section right now, except they have SPC camber arms instead of SPL.

That's hardly "this exact setup"! SPC doesn't compare to SPL.

Jetsimple · 03-08-2019, 09:38 PM

Quote:

Originally Posted by k67p67

That's hardly "this exact setup"! SPC doesn't compare to SPL.

Agreed, but since the OP doesn’t track the Z and is only interested in the drop, I figured it would work for him.

k67p67 · 03-08-2019, 09:44 PM

Agreed

03-08-2019, 09:44 PM	#7 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 314 Drives: 2017 Nismo Tech 6MT Rep Power: 3938	Agreed __________________ SOLD2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Kinetix front camber arms, voodo13 toe arms and spc toe bolts	redline10000	Parts for sale (Private Classifieds)	5	11-26-2017 08:12 AM
[FOR SALE] SoCal: SPL Rear Camber Arms, SPC Front Upper Control Arms, and 20mm/25mm Spacers	NoHyperbole	Parts for sale (Private Classifieds)	7	01-27-2017 09:41 AM
Front spl camber arms question	Z Runner	Brakes & Suspension	6	05-29-2016 01:14 PM
[FOR SALE] AMS front/rear camber arms + Traction arms - NEW	daisuke149	Parts for sale (Private Classifieds)	10	04-29-2014 12:24 PM
SPC rear camber arms needs drilling? end links for hotckis question as well.	kevin.z	Brakes & Suspension	4	06-25-2010 10:30 PM

03-04-2019, 04:33 PM	#1 (permalink)
svt to 370z Base Member Join Date: May 2011 Location: berea,oh Posts: 139 Drives: 09 red 370z 6mt Rep Power: 16	so its necessary so the tires don't wear unevenly in the inner tread

03-08-2019, 10:33 AM	#3 (permalink)
Jetsimple Base Member Join Date: Nov 2018 Location: NE Tennessee Posts: 52 Drives: 2010 370 Z Rep Power: 226	The toe bolts are pretty much a necessity. When I put on my KWV3 coilovers and went for a test drive, I couldn’t get over 25 mph without the car going all over the place. I set the toe out on the rear as far out as stock toe bolts would allow and it was better, but still not enough.

03-08-2019, 10:37 AM	#4 (permalink)
Jetsimple Base Member Join Date: Nov 2018 Location: NE Tennessee Posts: 52 Drives: 2010 370 Z Rep Power: 226	There’s this exact setup for sale in the classified section right now, except they have SPC camber arms instead of SPL.