10-06-2016, 12:15 PM
|
#9 (permalink)
|
|
Enthusiast Member
Join Date: Nov 2009
Location: SF, CA
Posts: 339
Drives: 17 C7 Z06 M7
Rep Power: 67
|
Quote:
Originally Posted by NOLA
When you say rebuilt the caliper, do you mean you got a reseal kit? Or you actually replaced parts of the caliper?
I have a 2010 Nismo and I have steering wheel and seat vibration at certain speeds, and under braking. The car pulls right as well. Here is what I have don't to try and fix the problem:
New tires
Road force balance
New rotors and pads
New brake fluid & several bleeds
To answer any obvious pieces of advice:
I've ensured tire pressure is always the correct pressure
I've had several alignments and tire balances.
The old rotors/pads had this problem and now have been replaced.
Rotors/pads were imbedded properly.
Pads have even wear as far as I can tell.
What is next in figuring out how to fix the steering wheel/seat vibration under braking and not braking? As well as the pulling right under braking.
|
I replaced the seals with a caliper rebuild kit. That said, given the stuff you've already done, you should check your wheel hubs, especially on an older car.
__________________
2017 Corvette Z06 7MT | 1LE | Stage 3 | DSCSport
|
|
|
Similar Threads
12Likes
Threaded Mode
