Is Moton also AST?

gomer_110 · 06-30-2016, 08:32 AM

Quote:

Originally Posted by cv129

Based on experience from the community as a whole (Z and G platforms), you don't need to reinforce the rear shock tower when switching to true type (AST and JRZ in this example).

^^^This

If you're really that concerned, you can order the AST dampers as non-truetype in the rear.

Also I've had AST 5200's on my Z for 2 seasons of autox with some occasional street driving and have no signs of degradation.

GeauxTigers1 · 06-30-2016, 03:23 PM

Quote:

Originally Posted by cv129

Every shock needs to be rebuilt/serviced at some point, just that:

The general car scene neglects shocks maintenance.
For lower cost systems, will be cheaper just to sell and replace
Our butt dyno more often aren't sensitive enough to know it
The down time and effort/cost being too prohibitive.

I raised that point of shock maintenance to bring awareness. The high initial costs of the shocks in question would justify the owner taking more active measures to ensure the shocks operating at a very high level. However, please don't take it as "you must rebuild them exactly after every xxxx miles or they stop working all together".

Based on experience from the community as a whole (Z and G platforms), you don't need to reinforce the rear shock tower when switching to true type (AST and JRZ in this example).

You do have a 6xx+ whp car, by default you have to take stringent care of your car anyway. Don't let this extra bit deter you. Being not your daily, whatever system you choose, you will have quite a while before any shock needs to be serviced or rebuilt. Don't worry.

This is great man, ty for addressing directly my setup and what I'm looking for to answer the question. I was just trying to avoid another reason I'm not able to drive it during the downtime. LOL. But that's great news, I'm back on the AST/JRZ wagon. Lol Repped!

Quote:

Originally Posted by gomer_110

^^^This

If you're really that concerned, you can order the AST dampers as non-truetype in the rear.

Also I've had AST 5200's on my Z for 2 seasons of autox with some occasional street driving and have no signs of degradation.

Saving this comment for when I order. Thanks man! Can't wait to be able to order these. Hoping just a month out when I'm done dealing with the eviction process of these nightmare tenants. They've cost me well over $10k. People suck.

gomer_110 · 06-30-2016, 08:38 PM

Quote:

Originally Posted by GeauxTigers1

Saving this comment for when I order. Thanks man! Can't wait to be able to order these. Hoping just a month out when I'm done dealing with the eviction process of these nightmare tenants. They've cost me well over $10k. People suck.

Just to be clear you'll either need the spl mid-links or an adapter to get universal 2.5" ID springs in order to not run true-type in the rear.

GeauxTigers1 · 07-01-2016, 02:14 AM

Quote:

Originally Posted by gomer_110

Just to be clear you'll either need the spl mid-links or an adapter to get universal 2.5" ID springs in order to not run true-type in the rear.

uhhhhh. How about I just message you to confirm when I have my order straight? LOL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moton dealers, suggestions needed.	MadBarber	Brakes & Suspension	3	03-27-2013 07:59 PM
Moton dealers in Socal?	MadBarber	Track / Autocross / Drifting / Dragstrip	1	03-24-2013 11:02 PM