installed bbk, can I put oem front 13inch rotors and calipers on rear? base model

labrador · 03-04-2016, 06:34 PM

Hey guys. I installed a big brake kit on my Z, ksport procomp. Can I put my oem front calipers and rotors on the rear? I have 20s so clearance isnt an issue. Thank you

2009 base model

Ghost116 · 03-05-2016, 09:57 PM

Anything is possible with the right wallet/skill. As far as "is there a bolt on kit for it" no. Could u fab your own brackets, lines, mounts and find rotors to fit properly yes you could. Google diy bbk on 350z guy made his own brackets for wilwood caliper a I think I was

cjwsrt6 · 03-05-2016, 10:59 PM

Just a thought, I don't know how much on this car, but the srt I had I could go big brake Amg calipers up front, some guys would try and run the regular fronts or base rears with it but I did through of some brake bias when doing this

Rusty · 03-05-2016, 11:10 PM

Quote:

Originally Posted by labrador

Hey guys. I installed a big brake kit on my Z, ksport procomp. Can I put my oem front calipers and rotors on the rear? I have 20s so clearance isnt an issue. Thank you

2009 base model

NO! The rear rotors have the e-brake inside of them. The calipers won't bolt up to the brackets. And you would set-up the ABS, and brake balance. The square inch surface area of the front 4 piston caliper is greater then that of a 4 piston rear BBK kit caliper.

burntz · 03-12-2016, 09:06 PM

Quote:

Originally Posted by Ghost116

Anything is possible with the right wallet/skill. As far as "is there a bolt on kit for it" no. Could u fab your own brackets, lines, mounts and find rotors to fit properly yes you could. Google diy bbk on 350z guy made his own brackets for wilwood caliper a I think I was

Don't do this! That guy was a maniac !

The idjut later blew up his engine with a DIY turbo install going down the back straight of Sebring at 140.

I made those when it was 3000+ $s to get a bbk.

I've just always liked building things, now it's an 18' sailboat.

My current recommendation would be to buy a used set of sport / akabono brakes.

osbornsm · 03-14-2016, 07:59 AM

Quote:

Originally Posted by labrador

Can I put my oem front calipers and rotors on the rear? Thank you.

Ghost116 · 03-19-2016, 10:58 PM

I wouldn't say don't do it. Maybe the op is an engineer who designs, tests and builds airplane parts for a living but has 0 idea when it comes to cars. I'm sure someone with above skills (why I mentioned right skills

. Could make any part they choose on a car. I wouldn't assume he does or doesn't have the skills to make his own.

Rusty · 03-19-2016, 11:58 PM

Quote:

Originally Posted by Ghost116

I wouldn't say don't do it. Maybe the op is an engineer who designs, tests and builds airplane parts for a living but has 0 idea when it comes to cars. I'm sure someone with above skills (why I mentioned right skills

. Could make any part they choose on a car. I wouldn't assume he does or doesn't have the skills to make his own.

Once you figured out the ABS/Brake Balance/Ice Mode Issues Front rotor-ebrake set-up. Go for it. Let me know how it works.

Ghost116 · 03-20-2016, 08:04 AM

^^ would be impressive

. If it was track car get rid off all of above add second caliper for e brake?

03-04-2016, 06:34 PM	#1 (permalink)
labrador Base Member Join Date: Nov 2015 Location: texas Posts: 106 Drives: 09 370z Rep Power: 10	installed bbk, can I put oem front 13inch rotors and calipers on rear? base model Hey guys. I installed a big brake kit on my Z, ksport procomp. Can I put my oem front calipers and rotors on the rear? I have 20s so clearance isnt an issue. Thank you 2009 base model

03-05-2016, 09:57 PM	#2 (permalink)
Ghost116 Base Member Join Date: Aug 2015 Location: Ontario Posts: 167 Drives: Up coming Rep Power: 367	Anything is possible with the right wallet/skill. As far as "is there a bolt on kit for it" no. Could u fab your own brackets, lines, mounts and find rotors to fit properly yes you could. Google diy bbk on 350z guy made his own brackets for wilwood caliper a I think I was burntz and labrador like this.

03-05-2016, 10:59 PM	#3 (permalink)
cjwsrt6 Enthusiast Member Join Date: Apr 2014 Location: Alabama Posts: 452 Drives: 2005 crossfire Srt6 Rep Power: 12	Just a thought, I don't know how much on this car, but the srt I had I could go big brake Amg calipers up front, some guys would try and run the regular fronts or base rears with it but I did through of some brake bias when doing this labrador likes this.

03-20-2016, 08:04 AM	#9 (permalink)
Ghost116 Base Member Join Date: Aug 2015 Location: Ontario Posts: 167 Drives: Up coming Rep Power: 367	^^ would be impressive . If it was track car get rid off all of above add second caliper for e brake? labrador likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Socal: 2009 370z Base/Touring front and rear calipers and lines. Like new.	mattjk	Parts for sale (Private Classifieds)	19	12-27-2016 05:50 PM
Road course 6 piston front calipers + base rear caliper combo??	DatsunFTW	Track / Autocross / Drifting / Dragstrip	15	01-08-2016 10:54 AM
[WTB] 370Z Front & Rear calipers with Rotors	shrini23	Parts for sale (Private Classifieds)	4	11-18-2015 11:03 PM
[FOR SALE] New EBC Front and Rear EBC Sport Rotors Base Model 370z	hatebread	Parts for sale (Private Classifieds)	2	02-04-2013 09:09 AM
[FOR SALE] Full base -non sport - rotors/calipers/pads	Ni55anPat	Parts for sale (Private Classifieds)	3	01-01-2013 07:13 PM

03-19-2016, 10:58 PM	#7 (permalink)
Ghost116 Base Member Join Date: Aug 2015 Location: Ontario Posts: 167 Drives: Up coming Rep Power: 367	I wouldn't say don't do it. Maybe the op is an engineer who designs, tests and builds airplane parts for a living but has 0 idea when it comes to cars. I'm sure someone with above skills (why I mentioned right skills . Could make any part they choose on a car. I wouldn't assume he does or doesn't have the skills to make his own.