So if I already have an AFR gauge I can just use the sensor from that and connect it to the screen?

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7)
8)
9)
10)

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Hans Govil, kit 1, frp black console
8)
9)
10)



Sent from my SM-G925T using Tapatalk

1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
8)
9)
10)

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Hans Govil, kit 1, frp black console
8) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
9) Evan OSteen (Stillenz84) kit 2
10)

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Hans Govil, kit 1, frp black console
8) Jeremy Sutton, kit 1, frp with leather with silver stitch, ODBII, no badge
9)
10)

Sorry posted late...

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Hans Govil, kit 1, frp black console
8) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
9) Evan OSteen (Stillenz84) kit 2
10) Jeremy Sutton, kit 1, frp leather with silver stitch, ODBII, no badge

Legit question!


Sent from my iPhone using Tapatalk

I'm in for kit 1 in CF if it's not too late.

sorry im a little slow... so let me get this straight.. since all the reading is from the cable to the obd2.. it would read both banks of afr, fuel, oil, water, gas , intake temp, rpm,throttle, etc... exception of the the pressure ones like oil, fuel, and ex manifold presssure right? so whats the point of listing the temp sensors when it already read it off the obd2 and displays it on the screen... unless the after market once is more accurate or something? again sorry im just trying make it clear before i know what im going to purchase..

I am in for kit1, contingent on a response to my questions.

By Default we will have two schemes, will post pictures today or tomorrow, and will be mentioned in the invoice as well, sequence in screen is same its just one will have boost in page 3 for NA and one will have in starting page for FI, rest all is same.

We can display any gauge sequence but there will a charge of 240$ to redo the firmware for that design, but answer is YES can be done as a custom order.

Screen and module are powered together so we wont suggest running movies on he screen, and no it might not work.

Matte black wont be matching to the interior as interior is grayish, but we are charging a minimal amount 25$ for cleaning the FRP and painting it, you can try it on if doesn't like can redo he colour or wrap it.


this screen will work on AUX, so obviously cant see anything else, you need to switch to navi to see navi and press AUX to come back on the screen

Yes it can you need to connect the wires from sensors to the screen for one or both.

Some people prefer to use aftermarket ones so that why though they are not needed by any means.

Keep adding the name please

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Hans Govil, kit 1, frp black console
8) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
9) Evan OSteen (Stillenz84) kit 2
10) Jeremy Sutton, kit 1, frp leather with silver stitch, ODBII, no badge

Update:

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors (INVOICE SENT)
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors (INVOICE SENT)
3) Mike Mixon Kit 2 (INVOICE SENT)
4) Yushi Shirai, Kit 1, Cf console (INVOICE SENT)
5) Mattew Shelton Kit 1, Cf console (INVOICE SENT)
6) Evan OSteen (Stillenz84) kit 2 (INVOICE SENT)
7) FiftyFiv3 Kit 1, FRP unpainted, OBDII, (INVOICE SENT)

Below guys please send us email address for invoice to be sent

8) Steve Wiggins, Kit 1, FRP black console, extra sensors
9) Hans Govil, kit 1, frp black console
10) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
11) Jeremy Sutton, kit 1, frp leather with silver stitch, ODBII, no badg

So, that is a yes, you will not be able to listen to music, through the car, while in AUX mode while using this on the stock nav. I'm assuming from your round about answer to my question.

We've been talking via email. I just responded again.

Update:

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors (INVOICE SENT)
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors (INVOICE SENT)
3) Mike Mixon Kit 2 (INVOICE SENT)
4) Yushi Shirai, Kit 1, Cf console (INVOICE SENT)
5) Mattew Shelton Kit 1, Cf console (INVOICE SENT)
6) Evan OSteen (Stillenz84) kit 2 (INVOICE SENT)
7) FiftyFiv3 Kit 1, FRP unpainted, OBDII, (INVOICE SENT)

Below guys please send us email address for invoice to be sent

8) Steve Wiggins, Kit 1, FRP black console, extra sensors
9) Hans Govil, kit 1, frp black console
10) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
11) Jeremy Sutton, kit 1, frp leather with silver stitch, ODBII, no badge


12)370Z JT, FRP unpainted console only, nothing extra

I replied to your invoice, I need it sent to an alternate email without oil pressure.

Sent from my SM-G925T using Tapatalk

Sorry posted late...

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Hans Govil, kit 1, frp black console
8) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
9) Evan OSteen (Stillenz84) kit 2
10) Jeremy Sutton, kit 1, frp leather with silver stitch, ODBII, no badge
11) Dean Sultan, kit 2 (deans1993@hotmail.com)

ok i am in for Kit #2

What does the OBD II cable look like? Will it be low profile and how invasive is the install for those who already have navi. I know there has to be some bypass of the Aux screen shutoff.

I'm in for just the carbon fiber cubby portion if possible. Do you guys have a layout with no openings for knobs and buttons?

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Hans Govil, kit 1, frp black console
8) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
9) Evan OSteen (Stillenz84) kit 2
10) Jeremy Sutton, kit 1, frp leather with silver stitch, ODBII, no badge
11) Dean Sultan, kit 2 (deans1993@hotmail.com)
12) nismo 1234 (ds010392@hotmail.com), kit 2, OBDII, extra sensors.

No?

CarbonSignal - I PM'd you guys a few days back wondering if you had a few options available.

I emailed a few days ago about something else and never heard back. Not the quickest communication from these guys..

Sent from my SM-G925T using Tapatalk

They are in dubai so time zones much different and it's the weekend ;)

i private message them here on the forum and it usually takes a few days to hear back from them... and like dude said above my post.. CS is in dubai and im sure they have tons of emails and messages.. so give it a bit of time and im sure they will reply back.. well atleast they always do for me

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Hans Govil, kit 1, frp black console
8) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
9) Evan OSteen (Stillenz84) kit 2
10) Jeremy Sutton, kit 1, frp leather with silver stitch, ODBII, no badge
11) Dean Sultan, kit 2 (deans1993@hotmail.com)
12) nismo 1234 (ds010392@hotmail.com), kit 2, OBDII, extra sensors.
13) 2011 Nismo#91 (juiblex79@gmail.com), kit 1 ODBII, Leather Wrapped FRP with red stich

For some odd reason we aren't getting any notifications from the forum, our response time on email or FB(business page) is within few hours regardless of time difference, but apologizes if missed someone as its was a sudden flush of emails and messages and mainly were during the weekend Friday/Saturday for these guages and nismo lipkit.

for people with NAV screen can opt for Navtool or something similar in which you can still use audio part and for video run these gauges. You wont need to cut the brake wire if using Navtool

You will get it today

Its just a cable hooked under steering column and ther end hooked to the module, for NAVI people you need to stick it inside the dash somewhere but box size is small roughly around 5" by 3". Power wire is needed which can be taken from any either stereo or any other. For someone bit worried about installing any audio shop should be able to do it and install time wont exceed 30-45mins

Knob part and our emblem is there in the mold rest we do custom, We can delete the knob hole and emblem impression for some extra cost.

Replied

I will follow it up

update:


GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors (PAID)
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors (PAID)
3) Mike Mixon Kit 2 (INVOICE SENT)
4) Yushi Shirai, Kit 1, Cf console (INVOICE SENT)
5) Mattew Shelton Kit 1, Cf console (INVOICE SENT)
6) Evan OSteen (Stillenz84) kit 2 (INVOICE SENT)
7) FiftyFiv3 Kit 1, FRP unpainted, OBDII, (INVOICE SENT)
8) BryanZ34 Kit 1, CF, OBDII (INVOICE SENT)
9)Steve Wiggins, Kit 1, FRP black console, extra sensors (INVOICE SENT)
10)Dean Sultan, kit 2 (deans1993@hotmail.com) (INVOICE SENT)
11) nismo 1234 (ds010392@hotmail.com), kit 2, OBDII, extra sensors. (INVOICE SENT)
12) 2011 Nismo#91 (juiblex79@gmail.com), kit 1 ODBII, Leather Wrapped FRP with red stitch(INVOICE SENT)
13) 370JT, Just FRP console, holes closed (INVOICE SENT)


Below guys please send us email address for invoice to be sent

14) Hans Govil, kit 1, frp black console
15) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
16)

I was #10 a week ago. I sent PM with email for invoice and now I'm not even on the list. :confused:

Can you please re-add me??

Kit 1, FRP Unpainted, OBDII

Jsutton2@gmail.com

List updated Jsutton, you need to see who deleted your name :)

Numbers doesnt matter we will do the orders in the order invoices are paid


GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors (PAID)
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors (PAID)
3) Mike Mixon Kit 2 (INVOICE SENT)
4) Yushi Shirai, Kit 1, Cf console (INVOICE SENT)
5) Mattew Shelton Kit 1, Cf console (INVOICE SENT)
6) Evan OSteen (Stillenz84) kit 2 (INVOICE SENT)
7) FiftyFiv3 Kit 1, FRP unpainted, OBDII, (INVOICE SENT)
8) BryanZ34 Kit 1, CF, OBDII (INVOICE SENT)
9)Steve Wiggins, Kit 1, FRP black console, extra sensors (INVOICE SENT)
10)Dean Sultan, kit 2 (deans1993@hotmail.com) (INVOICE SENT)
11) nismo 1234 (ds010392@hotmail.com), kit 2, OBDII, extra sensors. (INVOICE SENT)
12) 2011 Nismo#91 (juiblex79@gmail.com), kit 1 ODBII, Leather Wrapped FRP with red stitch(INVOICE SENT)
13) 370JT, Just FRP console, holes closed (INVOICE SENT)
14) Jsutton, Kit 1, FRP, OBDII (INVOICE SENT)

Below guys please send us email address for invoice to be sent

15) Hans Govil, kit 1, frp black console
16) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
17)

I responded to the invoice you sent me. Had two questions about it and asked to send it to a different paypal address. If I get a response im ready to pay today!

Pmed

just paid! thanks CS!

I posted before saying I was in, but still haven't been added to the list, so let's try again.

Add me to the list for kit 1 in CF.

Email is rhys.ladhani@gmail.com

We talked over email but just in case I want KIT 1 with extra sensor ports with FRP CONSOLE thanks

Just paid, cant wait to install and share pics

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors (PAID)
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors (PAID)
3) Mike Mixon Kit 2 (INVOICE SENT)
4) Yushi Shirai, Kit 1, Cf console (INVOICE SENT)
5) Mattew Shelton Kit 1, Cf console (INVOICE SENT)
6) Evan OSteen (Stillenz84) kit 2 (INVOICE SENT)
7) FiftyFiv3 Kit 1, FRP unpainted, OBDII, (INVOICE SENT)
8) BryanZ34 Kit 1, CF, OBDII (INVOICE SENT)
9)Steve Wiggins, Kit 1, FRP black console, extra sensors (INVOICE SENT)
10)Dean Sultan, kit 2 (deans1993@hotmail.com) (INVOICE SENT)
11) nismo 1234 (ds010392@hotmail.com), kit 2, OBDII, extra sensors. (INVOICE SENT)
12) 2011 Nismo#91 (juiblex79@gmail.com), kit 1 ODBII, Leather Wrapped FRP with red stitch(INVOICE SENT)
13) 370JT, Just FRP console, holes closed (INVOICE SENT)
14) Jsutton, Kit 1, FRP, OBDII (INVOICE SENT)

Below guys please send us email address for invoice to be sent

15) Hans Govil, kit 1, frp black console
16) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
17)


emailed, haven't gotten a response yet !

I'll pay asap but I'm sending as a gift because paypal can kiss my *** with these fees. Lol