Fast Intentions RTP's & CF Mufflers & Stillen G3 Intakes+Dyno.

MrBMW · 08-26-2009, 07:09 PM

Just wanted to give a little heads up to the other guys that have this installed and also who plan to get it done. After going for spirited drive yesterday with my dealer (crazy man LOL). I noticed a slight knocking noise that wasn't there before.

I'm not sure what part this is, but on the Passenger side it was a bit loose, so all I did was loosen the Hose clamp and push it in a bit more and re-tighten. The driver side was fine. Once i re-tightened the knocking noise was gone. Just something very easy that could be missed and hopefully any other issues that might arrise we can sort out.

MrBMW · 08-26-2009, 08:32 PM

Hey Guys,

Just took the car for a quick spin around the block and got a little video. It's only from a Point & Camera, but it does give an idea of the sound for the Intakes. It was done with the windows down and 2nd gear. Will try for a better effort later.

You will need to turn up your volume a bit though LOL.

Ellz · 08-27-2009, 06:16 PM

Quote:

Originally Posted by MrBMW

Just wanted to give a little heads up to the other guys that have this installed and also who plan to get it done. After going for spirited drive yesterday with my dealer (crazy man LOL). I noticed a slight knocking noise that wasn't there before.

I'm not sure what part this is, but on the Passenger side it was a bit loose, so all I did was loosen the Hose clamp and push it in a bit more and re-tighten. The driver side was fine. Once i re-tightened the knocking noise was gone. Just something very easy that could be missed and hopefully any other issues that might arrise we can sort out.

Went and checked mine last night before a drive and I found a loose clamp. Hadn't come off, but would have eventually.

Guess they rushed mine a bit to get it out so they could close.

nismostu · 08-26-2009, 06:11 AM

Great write up - thanks for sharing. Very informative.

gromano · 08-26-2009, 08:22 AM

Nice write up Mr BMW... looks great, makes the engine bay look alot meaner i reckon.

I got my car dyno'd the other day with some friends (they all own hondas) lol and got 265.1bhp completely stock... different dyno's/different days i guess!!

They also mentioned to me that it was running very 'rich'. What exactly does that mean?? How do the intakes help with this u say?

Cant wait till you boys get the other stuff on too, wanna go cruising and see/hear it all in action

Let me know when it happens and we can go for a drive!

hey ps. keep a note of how much everything costs you will ya

Coz im thinking of doing the same eventually...

AH370Z · 08-26-2009, 09:42 PM

Well Done on doing the install and getting the review to us. However I dont see that these intakes are worth the $$$ considering you only get the gains over 6500rpm and you are actually losing torque in the lower rev range and a fair amount between 1500 and 2000rpm.

I also think that its another story once the bonnet is closed and you dont have a big fan blowing air directly in the engine bay.

I think the forced air system that Modshack has made is the way to go, but also may work very well in combination with the G'3 or the new R2C intakes which I hope bring some good results.

MrBMW · 08-26-2009, 11:09 PM

Quote:

Originally Posted by AH370Z

Well Done on doing the install and getting the review to us. However I dont see that these intakes are worth the $$$ considering you only get the gains over 6500rpm and you are actually losing torque in the lower rev range and a fair amount between 1500 and 2000rpm.

I also think that its another story once the bonnet is closed and you dont have a big fan blowing air directly in the engine bay.

I think the forced air system that Modshack has made is the way to go, but also may work very well in combination with the G'3 or the new R2C intakes which I hope bring some good results.

Thanks for compliments first off. Now as for $$$ per HP gained, as I have stated for me at least it's more to do with sound and functionality. As for the gains only being up top, thats to be expected. The stock ones are the restrictions in that range. Yes, you wont be driving at 6k+ all the time, but when/if you want to Track/Drag the car it will be helpful. Also it's a personal thing and each to their own. Some want bling, some want performance. If there was TT or SC kits out i would've done that, but there's nothing for now.

Also if you look at the graph again, the After run starts earlier on the graph. It's just a calibration thing thats all. So it's pretty much line ball till about 5200 (TQ) and the Stillen's keep it up for longer (was also mentioned in this same thread that i posted in the Intake/Exhaust section). Also why is that people go on about Bonnet Up/Down. I can understand it when say the bumper is off as thats where the PODS are. To be honest those fans are not going to push the amount of air the car will see when you're doing 5k rpm, in 4th gear.

Will also have to have another look at Modshacks site again. I did have a quick look a while ago, but I though the Forced air mod wasn't going to be as beneficial due to where the PODS are with the Stillen's.

Edit - Added larger dyno sheet, so it's easier to see results/compare.

MrBMW · 08-26-2009, 11:29 PM

Hey AH370Z, is this the MOD from modshack you are talikng about. I cant see how that would help the G3's though. It looks like it would help the Stock Intakes or something like the R2C's.

The Stillens are mount dead centre in front of the radiator, so we get direct airflow from the front spoiler.

GTRFAN · 08-27-2009, 04:56 AM

The A/F ratio is constantly adjusted by the ECU for engine load, speed, ambient air temp, etc. Yes 10:1 is very rich but its perfectly safe and kind of normal for a factory tune. A well managed aftermarket ECU like a Motec or the new Haltec will be able to keep the A/F in a slightly leaner range and make more power safely. The enemy to a lean A/F ratio is pre detonation, so going too lean is not a good idea.

MrBMW · 09-27-2009, 07:08 PM

Updated Post #2 with videos and install.

MrBMW · 10-04-2009, 05:51 PM

Hey guys, heres dome videos that i did yesterday, I have the Resonated Test Pipes, TDX Cat Back Exhaust and Carbon Fibre Mufflers. Thanks to wife for holding the Video camera (some shaky moments LOL).

Fast Intentions RTP's CBE CF Muffler - Launch

Fast Intentions RTP's CBE CF Muffler - Drive By's

Fast Intentions RTP's CBE CF Muffler - Mountain Run

Fast Intentions RTP's CBE CF Muffler - Driving Around

markymark · 10-04-2009, 07:34 PM

Awesome vids mate, thanks for posting them up

That last driving around vid - she really does sound like a lambo/exotic when u open her up

08-26-2009, 08:32 PM	#2 (permalink)
MrBMW Enthusiast Member Join Date: Jun 2009 Location: Brisbane, Australia Age: 49 Posts: 384 Drives: YELLOW 370Z 6MT NAV Rep Power: 17	Youtube. Hey Guys, Just took the car for a quick spin around the block and got a little video. It's only from a Point & Camera, but it does give an idea of the sound for the Intakes. It was done with the windows down and 2nd gear. Will try for a better effort later. You will need to turn up your volume a bit though LOL. __________________ My New Car Album. Stillen Gen III Intake Installed, F.I. RTP's Cat Back INSTALLED

09-27-2009, 07:08 PM	#10 (permalink)
MrBMW Enthusiast Member Join Date: Jun 2009 Location: Brisbane, Australia Age: 49 Posts: 384 Drives: YELLOW 370Z 6MT NAV Rep Power: 17	Updated Post #2 with videos and install. __________________ My New Car Album. Stillen Gen III Intake Installed, F.I. RTP's Cat Back INSTALLED

10-04-2009, 05:51 PM	#11 (permalink)
MrBMW Enthusiast Member Join Date: Jun 2009 Location: Brisbane, Australia Age: 49 Posts: 384 Drives: YELLOW 370Z 6MT NAV Rep Power: 17	Some new videos added. Hey guys, heres dome videos that i did yesterday, I have the Resonated Test Pipes, TDX Cat Back Exhaust and Carbon Fibre Mufflers. Thanks to wife for holding the Video camera (some shaky moments LOL). Fast Intentions RTP's CBE CF Muffler - Launch Fast Intentions RTP's CBE CF Muffler - Drive By's Fast Intentions RTP's CBE CF Muffler - Mountain Run Fast Intentions RTP's CBE CF Muffler - Driving Around __________________ My New Car Album. Stillen Gen III Intake Installed, F.I. RTP's Cat Back INSTALLED Last edited by MrBMW; 03-02-2010 at 10:35 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.	RCZ	Intake/Exhaust	270	06-03-2015 02:25 PM
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 02:32 PM
Stillen CBE vs Fast Intentions CBE?????	john370z	Intake/Exhaust	10	08-02-2009 09:12 PM
Must see offer from Fast Intentions...	F.I. Inc.	Southern California Region	5	07-11-2009 11:59 AM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 06:35 AM

08-26-2009, 06:11 AM	#4 (permalink)
nismostu Base Member Join Date: Nov 2008 Location: Adelaide - AUS Posts: 60 Drives: 09 370Z CS 6MT Rep Power: 17	Great write up - thanks for sharing. Very informative.

08-26-2009, 08:22 AM	#5 (permalink)
gromano Enthusiast Member Join Date: Jul 2009 Location: Brisbane (South) Posts: 308 Drives: 09 Nissan 370Z- Blue Rep Power: 17	Nice write up Mr BMW... looks great, makes the engine bay look alot meaner i reckon. I got my car dyno'd the other day with some friends (they all own hondas) lol and got 265.1bhp completely stock... different dyno's/different days i guess!! They also mentioned to me that it was running very 'rich'. What exactly does that mean?? How do the intakes help with this u say? Cant wait till you boys get the other stuff on too, wanna go cruising and see/hear it all in action Let me know when it happens and we can go for a drive! hey ps. keep a note of how much everything costs you will ya Coz im thinking of doing the same eventually...

08-26-2009, 09:42 PM	#6 (permalink)
AH370Z Base Member Join Date: Jun 2009 Location: Australia - Sydney Posts: 169 Drives: 11' 370z, 13' E92 M3 Rep Power: 17	Well Done on doing the install and getting the review to us. However I dont see that these intakes are worth the $$$ considering you only get the gains over 6500rpm and you are actually losing torque in the lower rev range and a fair amount between 1500 and 2000rpm. I also think that its another story once the bonnet is closed and you dont have a big fan blowing air directly in the engine bay. I think the forced air system that Modshack has made is the way to go, but also may work very well in combination with the G'3 or the new R2C intakes which I hope bring some good results.

08-27-2009, 04:56 AM	#9 (permalink)
GTRFAN Track Member Join Date: Dec 2008 Location: Melbourne Posts: 586 Drives: 370z Titanium 6MT Rep Power: 18	The A/F ratio is constantly adjusted by the ECU for engine load, speed, ambient air temp, etc. Yes 10:1 is very rich but its perfectly safe and kind of normal for a factory tune. A well managed aftermarket ECU like a Motec or the new Haltec will be able to keep the A/F in a slightly leaner range and make more power safely. The enemy to a lean A/F ratio is pre detonation, so going too lean is not a good idea.

10-04-2009, 07:34 PM	#12 (permalink)
markymark Base Member Join Date: Jul 2009 Location: Sydney Posts: 51 Drives: white 370z 6MT Rep Power: 17	Awesome vids mate, thanks for posting them up That last driving around vid - she really does sound like a lambo/exotic when u open her up